Bmw 750

[bobbyh]

Good morning

my m8 has just brought another 750 to swich the engines over as he killed his lol

any way the resone i tell you this is becuse i'm going to try and use the dif (shortaned) and the brakes and other parts if you can sugest any. i my build should be a cheep parts bin the car cost him £450 so should get a good prce

[Chris Gibbs]

Hi Bobby,

The 7 series diffs are very big, I should have a measure before you buy it.

The driveshafts and brakes are also pretty big and the hubs are attached to the trailing arms (like the 3 series) - this means that you'll probably need to make new hub carrirers up to fit a similar upright to the sierra one.

Let us know how you get on.

Cheers

Chris :)

[bobbyh]

right do you have any ideas on how to make the huds@?

[Chris Gibbs]

Internally you need to match the outer diameter of the wheel bearings. Eternally you need to be able to bolt or weld the bearing carrier to the upright in a similar way to the sierra hub.

I'll do you a little sketch later

Cheers

Chris :)

[bobbyh]

Internally you need to match the outer diameter of the wheel bearings. Eternally you need to be able to bolt or weld the bearing carrier to the upright in a similar way to the sierra hub.

I'll do you a little sketch later

Cheers

Chris :)

thanks for the help