View Full Version : VIN Plate
Davidbolam
2nd September 2013, 10:52 AM
Does anyone know what weights I should put on the identification plate?
I know when skov did his he only had to show manufacturer and the VIN no but i have read the new IVA manual and it looks like the lot has to be added again?
Can anyone confirm whether this is the case and also what weights I should put in if required.
David
K4KEV
2nd September 2013, 11:09 AM
Hi Dave ...see note 2 on statutory plates ....it states they do not have to be present but if are should be in order shown in required standard note 6 so don't bother (i'm not)
Davidbolam
2nd September 2013, 01:09 PM
Hi Dave ...see note 2 on statutory plates ....it states they do not have to be present but if are should be in order shown in required standard note 6 so don't bother (i'm not)
Are you just going with the vin stamped/welded into the chasis?
David
K4KEV
2nd September 2013, 06:09 PM
yes that as well but you still need a vin"plate" pop riveted on say the engine bulkhead or easy to see place.... something like this
MANUFACTURER D BOLAM ENGINEERING
MODEL HAYNES ROADSTER
VIN SABT*************
-----------------------------------------------
skov
2nd September 2013, 08:13 PM
The only mandatory information is manufacturer and VIN number. If you put anything else on there you're asking for trouble!
This is what I did and the tester was perfectly happy with it:
https://lh4.googleusercontent.com/-TPZBQ2jMRMg/UTZotAat8cI/AAAAAAAAJHg/fpfncjY2ZI8/s640/S5033393.JPG
Stot
2nd September 2013, 10:12 PM
Heres mine.
https://lh3.googleusercontent.com/-7JZ6MIvS3VA/UiT_HGxPZsI/AAAAAAAAH28/3O6l0HrhGZw/w800/ManufacturersPlate.JPG
Cheers
Stot
Davidbolam
13th September 2013, 09:14 PM
I've been reading the manual again and it says you cannot use the letter O however the vin I was given from the dvla office has both letter o's and number 0's. has anyone else cam across this?
David
Stot
13th September 2013, 09:25 PM
I've been reading the manual again and it says you cannot use the letter O however the vin I was given from the dvla office has both letter o's and number 0's. has anyone else cam across this?
David
They all start SABTVR0 from the DVLA. They say it 'Vee Arr Oh' but it will be entered as a Zero.
Cheers
Stot
Davidbolam
13th September 2013, 09:50 PM
They all start SABTVR0 from the DVLA. They say it 'Vee Arr Oh' but it will be entered as a Zero.
Cheers
Stot
It's been typed on the letter as Os and 0s so will just make them all zeros
David
vBulletin® v3.6.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.