Removing clutch cable from Merkur donor

[michmark]

Hello all,

I am in the process of stripping down my donor car and am puzzled by how to remove the clutch cable from the bellhousing. I removed the clip and the cable came partly out.

http://farm4.static.flickr.com/3602/3399822641_40dea6356b_o.jpg



What's the next step? I wish I had a repair manual for this thing.

Mark

[deezee]

If you don't need the same cable for your donor. Or your wasting hours of time, just do what I did, and cut the cable off.

[RAYLEE29]

Hi, most fords have a cover covering the end of the fork in your photo it looks like a metal one, pull this off and you can then see the end of the cable which you push through and slide sideways then pull out hope this helps. Ray

[michmark]

Thanks for the feedback. I don't know if I need the cable yet or not so I'll try to see the end of the cable and slide it out. Otherwise, the bolt cutters are standing by.:D

Mark