View Full Version : Bonzo - If you're still interested, my manifold pics!
23rd April 2009, 08:40 AM
I said ages ago I'd put some piccies up of my manifold - finally managed to do it! Hope your conversion is going ok, this one turned out fairly easy in the end!
23rd April 2009, 12:55 PM
hi, that looks good? what engine are you usig? and what are the throttle bodies from?
23rd April 2009, 03:48 PM
It's a 2.0l silvertop zetec engine. The bodies are from a CB900 hornet. They're 36mm bodies, which although a little small, will give a much better throttle response and low down torque (I hope!)
As they're cast in pairs, it's easy to respace them.
23rd April 2009, 05:52 PM
Many thanks for that. The manifold has come out very well. :)
I have done nothing on mine recently, been a bit crook the last few weeks. :(
Finaly feeling a bit better last weekend, a mountanin of gardening to catch up on. :eek:
Hopefully it'll not be too long before I can get back out into the workshop. :confused:
vBulletin® v3.6.4, Copyright ©2000-2020, Jelsoft Enterprises Ltd.