View Full Version : please show me your welds
andyuk697
4th October 2009, 03:24 PM
hi everyone
im just wondering what the welds are supposed to look like when they are fully welded
esp the outside ones are they meant to be ground flat so when the side panels are on they fit nicely
if anyone has any nice close up shots of theirs can you please show me
thanks Andy
dogwood
4th October 2009, 04:24 PM
Just looking for some pics.
Don't think I've got any.
But don't grind the outside one too flat, or you will destroy their strength.
Just a slight bump is fine, you wont notice it when you put the sides on anyway.....Well I didn't.:D
David
AshG
6th October 2009, 10:30 AM
Have a look on here
http://s609.photobucket.com/albums/tt174/haynesroadster/?start=0
andyuk697
6th October 2009, 06:41 PM
Have a look on here
http://s609.photobucket.com/albums/tt174/haynesroadster/?start=0
hi ash
your welds look really flat have you ground them down at all
thanks Andy
squbti
6th October 2009, 07:16 PM
hi andy , i´m TIG welding obout 90% of my chassis & the welds turn out realy nice & flat , i´m also using the MIG welder for some parts & to get a strong & flat weld i just use the grinder to make a little groov in the joint & then weld hot! the welds turn out flat but also strong . hope this helps:)
samy
james3004
25th November 2009, 10:16 PM
ash, did you fully weld the chassis befor putting the rear tubes on?
AshG
25th November 2009, 11:15 PM
yes i fully welded the chassis then welded on the rear tubes. .
vBulletin® v3.6.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.