Roll Bar Group Buy Round 4

[AshG]

OK Guys The Price is 35.60 plus £9 delivery (delivery price seems to have gone up since last time. must be someting to do with christmas.)

if we can get all the payments sorted asap then i may be able to get them out before christmas.

Please Make Payment via paypal to Ashgardiner@hotmail.com


Dont forget to include your address, username and contact number for the delivery guy.


if you cannot pay via paypal please pm me.

Cheers

Ash



have just noticed andys thread showing how many people are building roadsers pop up again . looks like the number has jumped up yet again since i last did a group buy.

The roll bars are made from 50.1mm tube 3.2mm thick and are very strong. they should cost around the £35 mark plus postage note this is for the main bar only.

cant remember the exact total price from last time but im sure it would have changed yet again due to steel prices going up and down.

As usual i will need 10 orders to get a good price. if i can get 10 people wanting one then i will get exact prices etc etc.

more info to follow soon....

This was the last lot so you can see what they look like

http://www.haynesroadster.pwp.blueyonder.co.uk/rollbars.jpg

i can ship them anywhere but obviously you will have to cover the postage costs. last time i think it was about £8ish to the uk and £20 something to europe

this is a picture of mine finished on the car im sure some other people have some picts of theirs too.
http://i707.photobucket.com/albums/ww75/ashgardiner/P1030207.jpg



List so far.

TKPM PAID
PeteH PAID
KenK PAID
old_bill PAID
Enoch PAID
KevPR PAID
James3004 PAID
mr-p PAID
ginger nutter PAID
Ryan PAID
Adrianreeve Paid

[tkpm]

I will have one Ash, please :D

[PeteH]

Yes please, I'll have one Ash:)

[KenK]

Me too please, many thanks

[Bonzo]

I must say Ash

Your Roadster is looking stunning :cool: :cool: :)

It really looks the muts nuts, gutted I missed it at Exeter :(

Well done mate

[old_bill]

One for me to please :)

[AshG]

Cheers Ronnie has took a lot of effort to get it done so quickly. not long until its road legal hopefully

list updated

[HandyAndy]

Ronnie is spot on, Ash,s car looks the dogs wotsits :cool:

shame about the ugly bu@@er stood beside it in the photo :p :D (its not Ash)

The man responsible for the creation :cool:

cheers
andy

[dogwood]

The man responsible for the creation
cheers
andy

" Chris????? Chris who?????":D :D Sorry Andy could'nt resist.


Yea Ash your car does look good.
You must have been up all night polishing it.
It was still full of tools when I saw it...:rolleyes:

David

[AshG]

it were chris gibbs that polished it for me. he managed t do most of it sitting in his chair :D

[Land Locked]

Ash, the car looks awesome. Hope I can get mine to look half as good.

[Chris Gibbs]

it were chris gibbs that polished it for me. he managed t do most of it sitting in his chair :D

Oh aye, Multi talented me.:D

Cheers

Chris :)

[Enoch]

Can you bung my name down for one as well please?
Fanks,
Enoch.

[kevpr]

I'll have one of them too please.

[londonsean69]

Guys

I have one of these, and they are very well made. Please be aware you just need to 'fettle' the ends so it sits flat on the plates. The bending is spot on, not a crease or dimple in sight:D


To make it a bit easier for Ash to keep track of who wants one, I have started a list.

If anyone else wants one, just quote this post, and strip out anything un-neccesary


TKPM
PeteH
KenK
old bill
Enoch
KevPR




On a slightly different track, notice how you have 6 orders from the 14 posts!! Thats an even faster take up than before:D

[james3004]

Me too


TKPM
PeteH
KenK
old bill
Enoch
KevPR
James3004

[mr-p]

That makes eight..


TKPM
PeteH
KenK
old bill
Enoch
KevPR
James3004
mr-p


Cheers Ash.

[AshG]

cheers sean

i like to let the post run for a few days as some people only come on now and then and it saves all the pm's i get after its all done and dusted.

[AshG]

looking like were having a problem getting to 10 this time.

[james3004]

Someone must want a spare! lol
:p

[ginger nutter]

That makes NINE


TKPM
PeteH
KenK
old bill
Enoch
KevPR
James3004
mr-p
ginger nutter

[AshG]

one more guys.

[Ryan]

Make that ten.

1. TKPM
2. PeteH
3. KenK
4. old bill
5. Enoch
6. KevPR
7. James3004
8. mr-p
9. ginger nutter
10. Ryan

[AshG]

Make that ten.

1. TKPM
2. PeteH
3. KenK
4. old bill
5. Enoch
6. KevPR
7. James3004
8. mr-p
9. ginger nutter
10. Ryan

ok thats 10 please see the first page for payment details.

Cheers

Ash

[james3004]

Thanks Ash, you're a star!!!!:)

[adrianreeve]

Ash

One more please!

Cheers

Adrian

[AshG]

adrian added to the list.

[AshG]

just old_bill left to pay now. have sent him an email to see if he still wants one. either way we have an order of 10

[AshG]

ok guys order has been placed unfortunatly they wont be ready until the week after chrstmas.

as soon as i have them they will be sent out.

[PeteH]

Thanks Ash :)

Pete

[twinturbo]

is there room for one more?

TT

[ginger nutter]

Received my roll bar today, thanks ash.
Get out in the garage tomorrow and start fitting it :)

[AshG]

Received my roll bar today, thanks ash.
Get out in the garage tomorrow and start fitting it :)


good to hear it got to you ok. they all got collected yesterday so they should be arriving shortly.

[james3004]

I received mine today thanks ash :D

Happy New Year everyone!!!!!

[PeteH]

Received mine just now.

Thanks Ash.

[Enoch]

Just got mine too, thanks Ash.

[old_bill]

Received today, Thanks Ash :)

And to everyone a Happy New Year

[kevpr]

Got mine today. Looks great, Cheers Ash

[K4KEV]

Hi Ash......is there a round 5 on the cards soon????
Kev

[tkpm]

I have one of Ash's roll bars that i want to sell for £35 p+p if anyones interested.

Will post up a picture later.

Terry

[AshG]

Im out in the states at the minute will be back soon. If ten people can get together for a roll bar group buy then I don't mind doing a batch.

[DStanley1809]

I just found my birthday present from my parents next month :D

I'll have one please

[David_17]

I'll take one too ;)

Can you supply the cross bar and rear supports etc too? like a full kit.

[james3004]

Ash just supplied the hoops last time but i brought 2 x 1.5m lengths of 38mm tube from ebay, it wasn't as hard as i thought ot would be to make the support bars up:)

[Davey]

I'm in for one Ash.

D.

[Wgroove]

Just back from a holidaytrip with a VW T2 campervan in Cornwall !
Can i still join the group buy ? Transport costs to Belgium ?

Greetings,

Wim

[K4KEV]

Well that looks like 5 up to now...... same again and were rockin, hav'nt even started the chassis yet (soon) but that is an item I don't mind putting to one side till needed.;)

[david4kids]

Put me down as no 6 but I will pick mine up if that is ok I am only round the corner in Essex

[Josh]

Put me down as number 7 please!

Josh

[Wgroove]

3 to go !!!!

[David_17]

Come on peeps. Need 3 more :D

[K4KEV]

Howay man....surely theres another 3 ooot there sumwears!!!:confused:

[dan_g8]

just blown this months budget on some alloys to get my chassis rolling!!! would be interested if your still need people next month though ......

[gaz05]

How much will it be this time around with P+P?

[MikeB]

I could be temped, can you confirm the price plus P&P what are the dimensions of the bar. I'd like quite a low one.

Mike

[big_wasa]

will keep an eye out, will this be a new thread ?

[David_17]

bump to top

[leroybrown911]

Put me down for one please, they will look sweet as!:D

[MikeB]

So with me and Leroy how many is that left??

[K4KEV]

Okay lets set the ball rolling here ....I know this was a continuance of round 4 so round 4 plus 10
1.K4KEV
2.
3.
4.
5.
6.
7.
8.
9.
10

[David_17]

1. K4KEV
2. David_17
3.
4.
5.
6.
7.
8.
9.
10.

[MikeB]

1. K4KEV
2. David_17
3. MikeB
4.
5.
6.
7.
8.
9.
10.

[leroybrown911]

1. K4KEV
2. David_17
3. MikeB
4. Leroybrown911
5.
6.
7.
8.
9.
10.

I'll have one please :D

[DStanley1809]

1. K4KEV
2. David_17
3. MikeB
4. Leroybrown911
5. DStanley1809
6.
7.
8.
9.
10.

[Josh]

1. K4KEV
2. David_17
3. MikeB
4. Leroybrown911
5. DStanley1809
6. Josh
7.
8.
9.
10.

[Wgroove]

1. K4KEV
2. David_17
3. MikeB
4. Leroybrown911
5. DStanley1809
6. Josh
7. Wgroove
8.
9.
10.

Does anybody know what the transportcost will be to Belgium ?

Wim.

[mikemph]

1. K4KEV
2. David_17
3. MikeB
4. Leroybrown911
5. DStanley1809
6. Josh
7. Wgroove
8. Mikemph
9.
10.

[rapidtornado]

1. K4KEV
2. David_17
3. MikeB
4. Leroybrown911
5. DStanley1809
6. Josh
7. Wgroove
8. Mikemph
9. Rapidtornado
10.

[DRCorsa Engineering]

1. K4KEV
2. David_17
3. MikeB
4. Leroybrown911
5. DStanley1809
6. Josh
7. Wgroove
8. Mikemph
9. Rapidtornado
10. DRCorsa

[MikeB]

Looks like we are go! Ash can you get the material for the backstays and centre stay just out of interest?

[David_17]

Looks like we are go! Ash can you get the material for the backstays and centre stay just out of interest?

Woo hoo. I too was going to ask about the rear stays and cross bar. Also pates if possible would be great.

[Davey]

Oh bum!! I wanted one but have not seen this thread for a week or two so missed getting on the list:mad: . Guess I'll just have to make my own then:( .

D.

[David_17]

Oh bum!! I wanted one but have not seen this thread for a week or two so missed getting on the list:mad: . Guess I'll just have to make my own then:( .

D.

As far as i know, 10 was the minimum before materials were ordered. You may still be in luck. :)

[DRCorsa Engineering]

I would be interested too for the rear stays and cross bar, to get the roll bar assembly as a complete package.

[Loco_Bill]

I'd be interested in a roll bar too if its not too late!

Let me know if we can have more than 10

[K4KEV]

Can't seem to get hold of Ash.... where are you bud ?

[leroybrown911]

Think I have my name on the list, would be interested in the stays also. Please let me know if available and how to get payment to you.

Cheers
Leroybrown911

[David_17]

Any updates on this? :)

[AshG]

sorry guys been mega busy. will get final prices and post them up next week. i will start a new thread when i know more.

[squbti]

Hi ash, i have one of your rollbars that i got last year & it great , i just had my roadster pass the first of three test with no remarks but the tester wanted to know what kind of steel the rollbar is DIN or standard & grade & all the specefications ,i would apreciate it if you could look it up for me .
thanks
Samy

[HandyAndy]

i just had my roadster pass the first of three test with no remarks.
thanks
Samy

Well done Samy :cool:

1 down 2 to go, good luck with the next stage/test.

cheers
andy

[squbti]

Thanks Andy, it feels so good to have finaly done that & know that I´ve done a good job so far but I have to say its thanks to this forum & the support of everyone here.
Samy

[HandyAndy]

Thanks Andy, it feels so good to have finaly done that & know that I´ve done a good job so far but I have to say its thanks to this forum & the support of everyone here.
Samy

Its a great feeling have the support of the forum :cool:

BUT

YOU built the car, congratulations on passing the first stage, its interesting how cars are tested in different countries,
Look forward to some photo,s of your car :)

cheers
andy
(ps...sorry for the thread hijack:o )

[squbti]

Thanks Andy, i´m working on the photos & will have them on a new thread;) soon.
Samy