its got to go

[davie h]

since the birth of my second boy and the fact that my garage has now been converted into another room. (it was that or move and we couldnt afford to move) i havent touched the car in almost a year and a half and i have nowhere to work on it i have decided to sell up. i have the following bits for sale if anyone is interested. delivery to be added on,or if anyone buys a lot i could meet halfway for the cost of fuel.



chassis complete made by myself with 3ge brackets £300 twinturbo
1.8 zetec pre aug 94 ,escort sump,flywheel and new water pump £70
zetec inlet flange £18
home made engine mounts for zetec with landrover bushes £25 teun
mk2 escort rack new never used only trial fitted £40 first dibs to tkpm
rack alloy brackets £15 tatey
3ge rack extensions new £18 tatey
new sierra track rod ends £10 tatey
3ge mushrooms £30 tatey
bottom ball joint (imp) £15 tatey
transit drag links £10 tatey
front wishbones £ 85 ryan
rear wishbones £85 ryan
rear uprights £50 twinturbo
wishbone bushes £70 handyandy
bike carbs £40
coli packs x2 £5 tatey
edis module and wiring plug with a crank sensor (wires cut) £15
edis/coil/crank sensor wiring uncut wire for crank sensor £10
pedal box complete pedals have the gripper tape on £45 teun
diff bracket weled £15 tatey
coloumn bush (sierra) £4
clarke engine stand £ 25 tatey

i also have a sierra registered in my name which is in bits wich includes the front uprights,front calipers,rear brakes,wiring loom, haynes manual, dials hand brake lever and a load of other bits save you the hassle of stripping one down. £100

if anyone is interested give me a shout as i have said if any one from down south wants a lot of bits i could meet somwhere over the border if needed. i have added picks of most things to my flickr account below.


Davie

[AshG]

thats a shame that you are having to give up.

on the plus side you will be able to start again one day once the kids are a bit older.

[Tatey]

Im really sorry to hear you're selling up. I'll happily take the following off of your hands:

rack alloy brackets £15
3ge rack extensions new £18
3ge mushrooms £30
bottom ball joint (imp) £15
transit drag links £10
diff bracket weled £15
clarke engine stand £ 25
Coil pack £5

You don't happen to have the steering column, cowl and key for the sierra do you?

[tkpm]

Please could i have your,

mk2 escort rack new never used only trial fitted £40


Terry

[teun]

Davie i would like to buy the pedalbox if you can sent it to Holland? Ofcourse i pay the shippingcost no problem.
cheers Teun

[Ryan]

PM sent ref wishbones :)

[davie h]

Teun

if you pm me you address i will check the cost of postage and get back to you.

Davie

[Ryan]

I will take the wishbones, Thanks.

[teun]

Hi Davie i did pm my adres.

Thanks

[HandyAndy]

with regard the wishbone bushes, is that a full set of the "poly bushes" including the crush tubes?

cheers
andy

[davie h]

with regard the wishbone bushes, is that a full set of the "poly bushes" including the crush tubes?

cheers
andy


Andy

its a full set of 24 buhes which is made up of 48 half poly bushes and 24stainless cruss tubes, although at my count you only need 22 so thats 2 spare. there are pics in the flickr account below.

Davie

[HandyAndy]

PM sent to you Davie

cheers
andy

[twinturbo]

How finished is the chassis.. INTERESTED :)

TT

[twinturbo]

And possibly the uprights too, who made em.

I can sorta Nip up from carlisle unless your heading this way ;)

TT

[AshG]

i would say pretty finished

http://farm4.static.flickr.com/3125/2806234869_8f484861ff.jpg

[twinturbo]

I think I will have that ;) just got to think how to get it here???

TT

[davie h]

the chassis is complete i have welded on all suspension brackets with jigs etc. all brackets were supplied by 3ge. seat belt brackets welded on,i have welded 3mm plate on the bottom rails in the engine bay to take the zetec engine mounts i made. i did throw a couple of coats of rust proof primer and the slappedon a coat of black paint and it has sat in the back garden under a tarp since august last year. if you have any more questions give me a shout

Davie

[twinturbo]

would ya take £340 chassis and uprights??

TT

[davie h]

would ya take £340 chassis and uprights??

TT




i will take £340 but you will need to arrange pick etc. i will take pics of the chassis if you want.

cheers Davie

[twinturbo]

ok cool. what is the length? max width ?
Is it built for a glass or ally rear?

How soon does it need to go?

Cheers

TT

[twinturbo]

How much do you recon it weighs.. I think my Galaxy will take 75KG on the roof..

Cheers

TT

[davie h]

i could pick it up standing in the middle before i fitted the trans tunnel so i think it would go on the roof rack no probs but it would need strappedd down well.

Davie

forgot to say its built for an ally rear end.


you dont need a engine do you!!!!

[twinturbo]

ok m8.

I will buy some roofbars for the galaxy. Are you arround during week 15-19.. I am off work so can pop up.

Cheers

TT

[twinturbo]

Is there a gearbox to match the engine?

TT

[davie h]

to everyone who has asked for parts/prices for delivery please bear with me and i will get back to you asap. i will also have a look in the shed and see what other parts i have.


Davie

[davie h]

items still left any takers before i put them on ebay

1.8 zetec pre aug 94 ,escort sump,flywheel and new water pump £70
zetec inlet flange £18
edis module and wiring plug with a crank sensor (wires cut) £15
edis/coil/crank sensor wiring uncut wire for crank sensor £10
type 9 box £60
sierra uprights which are reamed out to suit the bottom ball joints (need bearings) £30
if anyone is after any donor parts give me a shout as i have most of the running gear from the sierra.

i still have a sierra registered in my name v5 plates and chassis plates which is in bits wich includes the front uprights,front calipers,rear brakes,wiring loom, haynes manual, dials hand brake lever and a load of other bits save you the hassle of stripping one down.

Davie

[twinturbo]

put me down for the camber adjusters.. puts me at £350 :eek: :cool:




TT

[twinturbo]

May as well have the column Bush too..

TT

[davie h]

ok will do i will send you a pm

Davie

[jimbo]

I'm interested in the Engine subject to shipping costs (pm sent)

Jimbo

[twinturbo]

Where are you located Jimbo?

TT

[jimbo]

Oxfordshire.

Jimbo

[twinturbo]

Ahh well, I could get it as far as carlisle, but that's not a a big help to you I guess.

TT

[gingea1pom]

Davie,

PM sent.

Cheers Ginge

[jimbo]

Ahh well, I could get it as far as carlisle, but that's not a a big help to you I guess.

TT

Well it's closer but still quite a drive! Thanks for the offer tho'

Cheers

Jimbo

[tkpm]

Thanks Davie,

The steering rack turn up today, once again thanks :D

Terry

[davie h]

Terry

that was quick i only posted it at 16:30 yesterday at the small local post office glad it got to you ok.

Davie

[gingea1pom]

Davie,

The carbs have just turned up.:D

I am really chuffed with them. They have the TPS on and are really close to the correct spacing for the CVH and really clean to boot. Thanks again I think I got a bargain.

Just need to get on with some building now.

Cheers Ginge

[davie h]

Ginge

Glad you got them ok that was quick delivery, i hope they go ok for you.

Davie

[teun]

He Davie everyone got his items i am still waiting????


Just a joke.:D

[davie h]

Teun

thats because you fecking miles away and everyone is stoned:D

Davie

[davie h]

all the parts that were posted etc have been delivered except your drums paul. i sent the engine to Jim by pallet and used

http://www.nationalpallets.co.uk/

they were byfar the cheapest and the engine was picked up in Glasgow at 16:30 yesterday and has already arrived in Oxford today even though i payed for 48hr delivery. great service if anyone needs heavy items moved about the country.

Davie

[jimbo]

I'll second that very impressed with the service, according to the wife they delivered it at about 10:30 (I haven't seen it yet but she says it looks engine shaped!)

Davie, thanks for sorting all this out, best of luck for the future.

Jim

[twinturbo]

I found these guys.

http://www.speedshift.co.uk/index.asp

£48 on a half pallet, £54 on a full.


TT

[davie h]

they would have been £71 for the delivery just had a check.

Davie

[twinturbo]

strange , i did two quotes and speedy cam out £10 cheaper... ODD..

TT