PDA

View Full Version : my build

chris m
12th April 2010, 09:09 PM
hi
a couple of pics of my build and donor car
gingea1pom
12th April 2010, 09:14 PM
Chris,

Looking fine there my friend, a nice clean and tidy work shop.

Are you using a DOHC with MT75 per chance, due to the placement of U7?

Sorry this bit should be at the top hello and welcome enjoy the forum.

Cheers Ginge
dogwood
12th April 2010, 09:15 PM
Looking good Chris.
Think your pedal box upright is in the wrong place though


Doh!too slow ...:o
HandyAndy
12th April 2010, 09:33 PM
welcome to the forum Chris, :)

I like the "well thumbed " pages of the book on your build table :D mine looks like that too :)

Chassis looking nice :cool:

cheers
andy
chris m
12th April 2010, 09:33 PM
Chris,

Looking fine there my friend, a nice clean and tidy work shop.

Are you using a DOHC with MT75 per chance, due to the placement of U7?

Sorry this bit should be at the top hello and welcome enjoy the forum.

Cheers Ginge
moved u7 since the pic, i was havin 1 of those moments when i put that in!
thanx anyway
gingea1pom
12th April 2010, 09:36 PM
Mate I did the same and was sooooooo pleased when HandyAndy pointed it out to me.

Cheers Ginge
Bonzo
13th April 2010, 10:12 AM
Mate I did the same and was sooooooo pleased when HandyAndy pointed it out to me.

Cheers Ginge

I didn't notice that my U7 was in the wrong place untill the chassis was fully welded :o
Just as well I hadn't cut the scrap section from the bottom rail :eek:

I only noticed when I measured up for the pedal box & things just didnt add up !!??

Welcome to the forum Chris m :)
It certainly looks as if you have made some good progress :cool:
spud69
13th April 2010, 10:29 AM
Welcome to the forum Chris, build is looking nice and don't forget to add your build to the builders list.

All the Best......AndyH
michael92
11th May 2011, 12:25 AM
does anyone know if this car was finished! he's only up the road from me aswell!

Michael
TheArf
11th May 2011, 07:57 PM
Looks like your making good process there, good luck and keep the photos coming

Arfon
Joelove
31st March 2012, 12:47 PM
does anyone know if this car was finished! he's only up the road from me aswell!

Michael

Nah he's had another project on the go that he's about finished so he should be cracking on with it very soon.
He basically has a rolling chassis now with an r1 engine tacked in.