View Full Version : P clips
misty
8th June 2011, 02:41 PM
Hi All
just a quick question
must the P clips be put on with rivits or can you use self tappers?
SeriesLandy
8th June 2011, 05:11 PM
No reason why self tappers and a blob of locktight would be fine, I'm using rivets but its personal preference.
flyerncle
9th June 2011, 12:22 PM
Less work with rivets,my personal choice.
misty
9th June 2011, 04:50 PM
super chaps many thanks
MikeB
13th June 2011, 12:36 PM
Hi jack slightly.
I orderd some 4.8mm p clips, they seem a little loose not clamping the brake pipe nothing bad I just expected them to be a nice tight snug fit, is this normal or should I order some more a different size. THe brake pipe is the standard 3/16? copper stuff i had a spare roll in my garage.
SeriesLandy
13th June 2011, 01:09 PM
The ones that I got (maplin) have 3/16 printed on them. My pipes were loose enough to slide backwards and forwards. Once you have a few bends/kinks in the pipe it won't move.
btw 3/16 is the correct size for the pipes and m10x1mm unions 25mm long.
snapper
14th June 2011, 10:57 AM
I have used little bits of push bike inner tube to take up the gaps
vBulletin® v3.6.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.