Harness top mount covers - what are you using?

[adrianreeve]

My car is pretty much ready for IVA, apart from covers for the harness top mounts, and its beginning to pi$$ me off!

I can't find covers that will actually go over the top mounts of my Sabelt harnesses. I've tried the Pajero ones on eBay, but they are nowhere near wide enough. I tried emailing Sabelt directly (twice!), and got no reply.

What have you guys found that works?

Cheers

Adrian

[alga]

Nut cap on the bolt and edge trim on the plate?

[adrianreeve]

Ash's car failed IVA at the same test centre I'll be using with a nut cap and trim, so I'm trying to find an alternative.

Cheers

Adrian

[rich]

i used a piece of black vinyl fabric. Bolt through the middle, sown across one side and press stud the other to get to the bolt, passed IVA with no problems,

[rich]

http://i50.photobucket.com/albums/f340/sid15/Kit/CB40B765-ABF0-4336-9859-3C6A90231C9B-2464-000002C3F8AC7C54_zpscacf7518.jpg

[Talonmotorsport]

Having got round the seat belt problem did it then fail on not having any triangulation on the roll bar?

[flyerncle]

Is it a testable item as its not used for the seat belt mounting,as long as it conforms to projections,sharp edges etc.

[Talonmotorsport]

Ah yes I see your point, sorry I missed that the belts where not mounted to it.

[rich]

Next year for sprinting I'm changing the roll bar and possibly having a removable brace bar from it into the passanger footwell which defiantly wouldn't pass IVA!