Albert,I think John quoted the difference in the body as Protech in alloy and Gaz in steel.

WOW...

11) !!!

That's a nice figure and obviously reflects that whilst we are all price concious, we are willing to put hands in pockets :)

And it's only the 6th of Nov!!!

TT

Protech Dampers, set of 4 x 13" with the 1" extension with 350 & 250 LB springs £340 + P&P

1. TwinTurbo ( not sure on spring rates though..... )
2. James3004
3. Ginger nutter
4. K4KEV
5. CaptainCrash1971
6. jiwillia
7. AndyJ
8. MikeB
9. Jasongray5
10. jmh
11. alga
12. Einiog



Updated again to include email enquiry.

Kind regards

John

Protech Dampers, set of 4 x 13" with the 1" extension with 350 & 250 LB springs £340 + P&P

1. TwinTurbo ( not sure on spring rates though..... )
2. James3004
3. Ginger nutter
4. K4KEV
5. CaptainCrash1971
6. jiwillia
7. AndyJ
8. MikeB
9. Jasongray5
10. jmh
11. alga
12. Einiog
13. Jerome

And again

Kind regards

John

Unfortunately I'm gonna have to remove my name from the list as the gearbox in my daily driver has just destroyed itself :mad:

So that's my build buget gone for a bit :(

Protech Dampers, set of 4 x 13" with the 1" extension with 350 & 250 LB springs £340 + P&P

1. TwinTurbo ( not sure on spring rates though..... )
2. Ginger nutter
3.K4KEV
4.CaptainCrash1971
5. jiwillia
6. AndyJ
7. MikeB
8. Jasongray5
9. jmh
10. alga
11. Einiog
12. Jerome
13.

Protech Dampers, set of 4 x 13" with the 1" extension with 350 & 250 LB springs £340 + P&P

1. TwinTurbo ( not sure on spring rates though..... )
2. Ginger nutter
3.K4KEV
4.CaptainCrash1971
5. jiwillia
6. AndyJ
7. MikeB
8. Jasongray5
9. jmh
10. alga
11. Einiog
12. Jerome
13. tigmatt

Hi john let me know when you want the cash mate send me pm with your paypal addy

Hi Andy,

No problem, I will contact each person to get paypal addresses to send an invoice.

Kind regards

John

are you just going to send the plates with the dampers? fine if you are :)

TT

Hi Rob,

That makes things easier for us, unless you need them sooner.

Kind regards

John

Protech Dampers, set of 4 x 13" with the 1" extension with 350 & 250 LB springs £340 + P&P

1. TwinTurbo ( not sure on spring rates though..... )
2. Ginger nutter
3.K4KEV
4.CaptainCrash1971
5. jiwillia
6. AndyJ
7. MikeB
8. Jasongray5
9. jmh
10. alga
11. Einiog
12. Jerome
13. tigmatt
14. Craig H
15. Mikel

Updated to include email orders.

Kind regards

John

Hopefully I'll be able to add my name to the list shortly and not wanting to be a real tight git but given the list now has got three times the original number of requested orders for the discount is it worth speaking again to Protech?

J

Hi Jimmy,

These prices are as low as they are going to get I'm affraid, they are at least £75 cheaper than you'll find anywhere else.

I shall close the list in the morning so this is, as they would say in the pub trade, "LAST ORDERS PLEASE" :D

Kind regards

John

Me too...
 

John,

a set for me too please.

Must be my well trained Pavlovian response to a call for 'last orders' spurring me in to action!

New list:

Protech Dampers, set of 4 x 13" with the 1" extension with 350 & 250 LB springs £340 + P&P

1. TwinTurbo ( not sure on spring rates though..... )
2. Ginger nutter
3. K4KEV
4. CaptainCrash1971
5. jiwillia
6. AndyJ
7. MikeB
8. Jasongray5
9. jmh
10. alga
11. Einiog
12. Jerome
13. tigmatt
14. Craig H
15. Mikel
16. eSteve

i would be up for a gaz set if we could get a list back before vat goes up :)

Baz...

Splash the extra £30, it will be worth it and the chances of finding 4 other peeps to go GAZ when the protec ones are so cheep is unlikly.

TT

Got the new CKC issue a couple of days ago. It's got some photos of Protechs used in all-weather conditions for several years. Ewww! Apparently the oxide layer on them from anodisation is not very thick.

If they've been used in all weather here in the UK I doubt anything will look good, the salt used on UK roads will destroy most finishes over a couple of years. Annodizing is measured in microns, so even the thickest may only be 25 microns.


Kind regards

John

AS John quoted :D... the anodised layer will never be that much thicker than 25 microns as it stops conducting electricity beyond that (whilst anodising) it goes without saying that if you want any kind of corrosion resistance to be prolonged in this country you have to rinse off at the end of the drive (if you can of course) or as soon as you can. it is as simple as that.:D

or spray often with wd40.

TT

Protech Dampers, set of 4 x 13" with the 1" extension with 350 & 250 LB springs £340 + P&P

1. TwinTurbo ( not sure on spring rates though..... )
2. Ginger nutter
3. K4KEV
4. CaptainCrash1971
5. jiwillia
6. AndyJ
7. MikeB
8. Jasongray5
9. jmh
10. alga
11. Einiog
12. Jerome
13. tigmatt
14. Craig H
15. Mikel
16. eSteve
17. Spalders.

That's it then all orders from now will be on the next group buy.

Thank you gentlemen.

Kind regards

John

Protech Dampers, set of 4 x 13" with the 1" extension with 350 & 250 LB springs £340 + P&P

1. TwinTurbo ( not sure on spring rates though..... )
2. Ginger nutter
3. K4KEV
4. CaptainCrash1971
5. jiwillia
6. AndyJ
7. MikeB
8. Jasongray5
9. jmh
10. alga
11. Einiog
12. Jerome
13. tigmatt (PAID)
14. Craig H
15. Mikel
16. eSteve
17. Spalders.

1. TwinTurbo (PAID)
2. Ginger nutter
3. K4KEV
4. CaptainCrash1971
5. jiwillia
6. AndyJ
7. MikeB
8. Jasongray5
9. jmh
10. alga
11. Einiog
12. Jerome
13. tigmatt (PAID)
14. Craig H
15. Mikel
16. eSteve
17. Spalders.

Rob, you have far too much time on your hands :D

Kind regards

John

Waiting for components to crack on with the roadster :D :D :D

TT

1. TwinTurbo (PAID)
2. Ginger nutter
3. K4KEV
4. CaptainCrash1971 (PAID:) )
5. jiwillia
6. AndyJ
7. MikeB
8. Jasongray5
9. jmh
10. alga
11. Einiog
12. Jerome
13. tigmatt (PAID)
14. Craig H
15. Mikel
16. eSteve
17. Spalders.

1. TwinTurbo (PAID)
2. Ginger nutter
3. K4KEV ( let go of some wonga):rolleyes: :rolleyes:
4. CaptainCrash1971 (PAID )
5. jiwillia
6. AndyJ
7. MikeB
8. Jasongray5
9. jmh
10. alga
11. Einiog
12. Jerome
13. tigmatt (PAID)
14. Craig H
15. Mikel
16. eSteve
17. Spalders.

Thanks John

1. TwinTurbo (PAID)
2. Ginger nutter
3. K4KEV ( let go of some wonga):rolleyes: :rolleyes:
4. CaptainCrash1971 (PAID )
5. jiwillia (PAID)
6. AndyJ (PAID)
7. MikeB
8. Jasongray5 (PAID)
9. jmh
10. alga (PAID)
11. Einiog (PAID)
12. Jerome (PAID)
13. tigmatt (PAID)
14. Craig H (PAID)
15. Mikel (PAID)
16. eSteve (PAID)
17. Spalders. (PAID)

Hi All, adjusted for all those of you who have paid.

Many thanks

John

Your paypal account must be looking nice :D

TT

It looks nice at the moment Rob, sadly though, most of it goes to other people sooner or later :( :rolleyes:

Kind regards

John

Any idea when there might be another one as missed this round?

1. TwinTurbo (PAID)
2. Ginger nutter (PAID)
3. K4KEV ( let go of some wonga)
4. CaptainCrash1971 (PAID )
5. jiwillia (PAID)
6. AndyJ (PAID)
7. MikeB
8. Jasongray5 (PAID)
9. jmh
10. alga (PAID)
11. Einiog (PAID)
12. Jerome (PAID)
13. tigmatt (PAID)
14. Craig H (PAID)
15. Mikel (PAID)
16. eSteve (PAID)
17. Spalders. (PAID)

Almost a Full House :)

TT

Mine will be done tomorrow (pay day!) sorry for the slight delay

Mike,

don't sweat it ;)

Kind regards

John

you had a mp

1. TwinTurbo (PAID)
2. Ginger nutter (PAID)
3. K4KEV ( let go of some wonga)
4. CaptainCrash1971 (PAID )
5. jiwillia (PAID)
6. AndyJ (PAID)
7. MikeB (PAID)
8. Jasongray5 (PAID)
9. jmh
10. alga (PAID)
11. Einiog (PAID)
12. Jerome (PAID)
13. tigmatt (PAID)
14. Craig H (PAID)
15. Mikel (PAID)
16. eSteve (PAID)
17. Spalders. (PAID)

Do we have an estimate for delivery John?

Cheers

TT

Hi Rob,

Hopefully towards the end of next week, so delivery the week after.

Kind regards

John