Taper reamer
 

Hi Everyone
I noticed from some earlier threads that there's a taper reamer doing the rounds. Just doing my uprights and I was hoping to borrow/buy/rent or whatever the arrangement is. Can anyone help?

I think its handyAndy reamer,maybe pm him he will probably know who has it and will be able to let you know.I think the deal is that its free but you have to post it to the next person who needs it.I may be wrong though.

Just a quick one, (and a bit of a thread highjack, sorry).

But we do this F.O.C for anyone who purchases their wishbones from us.

Kind regards

John.

Hi,

I have one of the reamers,Please PM me with your address and i will post it asap

Mike

Hi Mike
Had a pm from handyandy and pm'd you earlier. Many thanks for getting in touch. Please post to
(address removed from public viewing by forum moderator ( handyandy)

Only been a member of the forum for a couple of weeks and the response and helpfulness of the members has been fantastic. Thanks for your help I can get back to machining my mushrooms
Trif

Probably not a good idea to post your address on the forum mate ;-)

Hi Trif,

Will get it packed up Thursday and posted to you asap

Cheers

Mkie;)

Hi Mike
Cheers for that, just finished my mushrooms to the point where I can cut the taper and the uprights are cleaned and ready so the timings spot on.
trif

Hi trif,

Its on its way to you

Mike.

PS let me know when you have it

Cheers

Cheers Mike :

Trif,

Can you post it onto me please when you've finished. YHPM

Just done my mushrooms :) pics will be up tonight.

Just wondering if anyone is still using the reamer. if it's ok with Andy, could I borrow it. Ordering the ball joints tomorrow.

Gary

I've got the reamer (Thanks Twin). Andy says just to hold on to it until someone wants it.

That someone would be me !! Any chance you could post it on to me

Pm to follow
Rob

now at my house ive used it once got one side left to do so maybe next two to three days it will be ready to move on again.

cheers

rob

if you don't mind sending it this way... :)

Pm me your address and ill send it on

PM sent Thanks

Posted today but wont move till tuesday the woman behind the desk said should be heading your way tuesday :)

This reamer has been very well used now.

TT

its still bloody sharp too it cut the 15mm steel into the perfect taper for me shame i had to go from a 12mm hole up to a 15mm-17mm taper !! only the one blister it could benefit from a longer handle i thought ?:D

Yeh. Still pretty sharp. I used a thin screwdriver through the hole. Made the work a lot easier.

I welded a nut on the top of mine and used a T bar on it miles easier than the little bar they come with

I too used a screwdriver but still ended up with a blister
As it was the borrowed reamer i didnt want to modify it