Seat belt anchorage
Do the seat belt anchorage tubes have to be that imperial thread or is a metric size suitable
Thanks Stephen |
7/16 unf is normal seat belt thread,use what you want as long as they go through the belt,fold bracket to make it stronger and weld plenty on to chassis
|
Wha do u mean bend the bracket i was gonna make the u type bracket like the book
|
I think he means like this so you're welding around the foot of an L-shaped tab... Although I decided to cut it from 5mm box section.
|
I see well i was gonna get the 25 mm long threaded tubes and weld it to the bar then a 5 mm plate over it and weld all around that if that makes sense
Thanks |
What I did was make the actual bracket longer than book and fold the ends over in a long u shape and just weld a nut on instead of tubes.
|
Thanks guys
|
Quote:
2014-08-23_15-51-08 by Sylvain ROIG, sur Flickr Hope this will help :) |
That is exactly what "He" meant,Ta.
And put the bolt through plate and nut to center it before welding it..... |
All times are GMT +1. The time now is 06:23 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.