Bonnet
 

Hi everyone on the Saturn bodywork am I right in assuming the Saturn bonnet wide bulge is 1metre long so the gap between scuttle should be 1010mm thanks in advance

Sorry I mean gap between scuttle and nose cone

Its excactly the same legnth as the standard bonnet, fogive me for not knowing off the top of my head, il measure it up in the morning and post it up. As long as the scuttle is in the correct position and the nose is tight up against the front frame it will fit

Cheers Nathen the scuttle meets the bend in the chassis doesn't it cabin side

yes thats correct, you sometimes need to trim the bonnet to get an exact fit, depending on what size edge trim your using.

thanks alot