Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   SVA/Legal (http://www.haynes.co.uk/forums/forumdisplay.php?f=9)
-   -   Rear light radius fail (http://www.haynes.co.uk/forums/showthread.php?t=13494)

CTWV50 26th September 2014 08:26 PM

Rear light radius fail
 
Will these fail the radius check? They are from caterham and are used on most of their builds and the Caterham IVA check does not mention them as needing trim. But to my mind a tester could fail it? They are E and F marked. Your thoughts?



Very simliar light on CBS says IVA OK?

http://www.carbuildersolutions.com/u...g-120mm-x-80mm

skov 26th September 2014 09:16 PM

Mine are similar. I trimmed them as I thought a picky IVA man could fail them.
If in doubt stick some trim on.

K4KEV 26th September 2014 09:25 PM

Lol mine gave me a piece of emery cloth to take the sharp edge off.:D

Davidbolam 26th September 2014 09:30 PM

I used the same and superglued some rubber trim around. The same iva man found me a spanner to tighten something.

David

CTWV50 29th September 2014 11:16 AM

Cheers, going to rubber trim it. Pita though.


All times are GMT +1. The time now is 11:01 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.