Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Chassis (http://www.haynes.co.uk/forums/forumdisplay.php?f=4)
-   -   A-arm angles at standstill? (http://www.haynes.co.uk/forums/showthread.php?t=14232)

MKarlsson 19th November 2019 12:55 PM

A-arm angles at standstill?
 
How should the A-arms front and rear be angled at neutral bump? I cant remember seing a measurment for that in the book?

twinturbo 26th November 2019 07:41 AM

I think there is mention of ride height front/rear on the forums somewhere..

The rear does not matter too much as long as the static camber is zero .

The front is affected by the droop on the track rods, if you can get a reasonable ride height with the rack and rods level that will give a neutral starting ponint...

Although we probably all hate the idea, once built, a chassis setup session with the Pros will be the best money spent...


All times are GMT +1. The time now is 07:38 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.