Cheers, think im going the bike engine route, but im going to get it painted after im finished building so if i have to change things it wont mater so much
|
Try ebay for a column, or your local scrap yards.
That's a very clean garage! TT |
Quote:
Haha thanks, that's my garage, I do all my fabricating in my workshop at the bottom of my garden! |
|
I don't no why but I have the latest book with the new 10mm longer wishbones but the jig drawings look like they haven't been changed, so I had made my jigs to that, then when I had made a wishbone and checked the bush centres they were 10mm short, to say I was unhappy was an understatement, I can't believe there's nothing on the amendments page just to give you a heads up, I think i will get away with it as I have wound my rod ends out 5mm and I might skim 5mm off the matting face on the stub axle or put a spacer behind the hub, so a std driveshaft fits The rod ends are still in the tube insert a full 1" and they are only threaded that much so that's ok, just didn't really want them wound out to far |
|
Quality !;)
|
Very tidy indeed, keep it up mate
|
nice work and good progress, keep the pics coming :)
|
All times are GMT +1. The time now is 12:17 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.