Bonzo - If you're still interested, my manifold pics!
3 Attachment(s)
Bonzo
I said ages ago I'd put some piccies up of my manifold - finally managed to do it! Hope your conversion is going ok, this one turned out fairly easy in the end! Attachment 278 Attachment 279 Attachment 280 Cheers Adrian |
hi, that looks good? what engine are you usig? and what are the throttle bodies from?
Ray |
It's a 2.0l silvertop zetec engine. The bodies are from a CB900 hornet. They're 36mm bodies, which although a little small, will give a much better throttle response and low down torque (I hope!)
As they're cast in pairs, it's easy to respace them. Cheers Adrian |
Looking good adrian
Hi Adran.
Many thanks for that. The manifold has come out very well. :) I have done nothing on mine recently, been a bit crook the last few weeks. :( Finaly feeling a bit better last weekend, a mountanin of gardening to catch up on. :eek: Hopefully it'll not be too long before I can get back out into the workshop. :confused: |
All times are GMT +1. The time now is 03:27 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.