Cheers Ronnie,

Thats a thought but ive just checked & teh dims for the modded pedal box match up, it appears they are miss matched in the same document.

Might have been a cut & paste error or something?? LHD details on the RHD doc??

i cant get 3 of the links to work,is it my computer or are they broken?front frame guide parts 1.2 and 3.

I have just tried them and they worked fine, must be your computer.

Terry

Do you have MS Word Installed? Or Open Office?

TT

Hello has all.
I have just discovered this subject on the forum of kit-car French.
Superb bonds on the details of the frame, of conversions left right-hand side of the driver's cab
and the modification of the tunnel of limps has speed.
Can be possible to put this post in permanent top of list of the family of the frame.
Cordially.

Just for future reference, it looks to me like the jig drawings for the rear hub and the rear lower wishbone are wrong and should be back worked from the part drawings

A shame the hosting server from Ash no longer works... they were precious documents.

I had downloaded 2 of the documents when I was building my car, including the book amendments. I put them on my Google Drive server for public access.

https://drive.google.com/drive/folde...2xSRXZCdElrSEU

But I miss most of the documents from the old Book Amendments & Extra Guides section.

Does anyone have them, so we can gather them in one place ?

I have all of them except for the last two on Ash's initial list. I show they were created on my system in February of 2011, which is likely when I downloaded them. I can't be absolutely positive they are the very latest versions, but they likely are.

Message me with your e-mail address and I'll send them to you.

Regards,

Lonnie

Sylvain, I have the lot backed up.

I also seem to have...

• a number of Vodou tech drawings/chassis cut lists when Matt Barrett made them available in 2011
• some additional notes on the SSC MX5 version that I made myself, based on what was listed in SSC's webstore when Andy was around (e.g. damper/spring specs)
• technical drawing for chassis changes to accept SSC GRP rear panel

Hi,

Thanks to PorkChop and the documents he sent me, I have completed the list of "book amendment" documents my Google drive public section. Access is public.

https://drive.google.com/drive/folde...2xSRXZCdElrSEU