Front Top Wishbones
Trying to work out the correct way the front top wishbones should be on the sierra uprights. Anyone have any pics?
The threaded part is at an angle to the two tubes, does the threaded tube point up or down to the upright.
The thread is offset from center, I am guessing reward mount to get positive castor?
Upwards and longest leg of the arm at the front
Perfect! Many thanks.
On the rear, the two intersecting tubes at the chassis mount, towards the front of the car?
Top one then mounted so its equally in the middle of the two lower mounts?
As said in the book page 73 regarding rear wishbones:
"The lower wishbones need to be installed with the cross brace angled from outside rear to inside front"
The picture Fig. 5.32 page 74 shows the RH side of the car:
RearSuspAssembled by Voucht71, sur Flickr
Hope that will help :)
Yep, exactly how I have it.
Top guys as usual!!!!
|All times are GMT +1. The time now is 03:09 PM.|
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.