How to cover for IVA
Spending ages putting trim on stuff at the moment. I am a bit stuck with how to cover the locknut on the top drop link. Also do I need to cover the cast flats on the track rod ends? Tempted to just grind them off!
Thanks for any advice anyone! |
Ken, you can buy some large diameter heat shrink and cover them that way, or a lot of people on Locostbuilders use old bike inner tubes stretched over and cable tied on.
|
Quote:
For the track rod ends and the steering rack extensions I used electrical glands but furore kit cars sell them cheaply. David |
I used armoured gland boots to cover the rack extensions and top ball joint nut.
Mine came off the internet a lot cheaper than fueore. I googled something like replacement swa boots. They were also thicker and more rubbery than the screwfix ones. And much larger. Trim wise I put it on most bits but if it can be touched by a 100mm sphere (large orange) it needs to have a radius on it. |
Ken
I used cable glands on the rod ends the same as Dave. The lockouts I used cut down motocross bike fork gaters cable tied on |
Yep nut covers and cable glands. :)
|
All times are GMT +1. The time now is 06:08 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.