front/rear camber adjusters help!
 

as above got my rear/front camber adjusters today. do the slide in from the front of the wish bone or from the back, leaving the bolt face on the inside??

hope this makes sense

Which ones front or rear?

TT

[quote=twinturbo;33774]Which ones front or rear?

both mate lol

They can only go in one way.... the other way will leave the hub mounting point on the inside of the wishbone. Or are you talking about the quick adjusters, so you can adjust the camber without taking the wishbone off the hub? Cos they do go in from the back.

Think it makes sense, screw them in from the outside leaving the bolt face on the inside. The lock nut screws down from the bush tube side and clamps onto the face of the suspension arm.

Hope that makes sense.

AndyH

yeh the camber quick adjusters. the go in from the back then? and then ur top ball joint screws in from the front then lock it off with the nut on the actual wish bone tube?

is this the same for front and rears?

The adjusters go in from the back with the lock nut at the front(hub side of things)....Lets you adjust things without cocking about taking things apart.............simples:D
And you should have the rear lower bones with adjustable toe in and out.