Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Bodywork and interior (http://www.haynes.co.uk/forums/forumdisplay.php?f=8)
-   -   Saturn Bodywork (http://www.haynes.co.uk/forums/showthread.php?t=8276)

TheArf 14th July 2012 12:59 PM

Saturn Bodywork
 
Does anyone know if Nathan is going to start doing body work again sometime or has he sold the moulds on to someone else. I am starting to think about body work and I like the saturn style especially the bonnet with the longer scoop

Arfon

rpjg1975 14th July 2012 01:39 PM

When I spoke to him a little while ago I believe he was keeping the moulds and would still be doing bodywork but on a smaller scale. Drop him a pm and im sure he will confirm or deny!

Russ

PorkChop 14th July 2012 02:38 PM

He told me that he intends to carry on doing bodywork when things quieten down unless someone makes him an offer he can't refuse for the moulds.

Ben_Copeland 15th July 2012 12:11 AM

Equinox will be doing a longer scoop shortly if you want to try him.

mgglep 15th July 2012 04:06 PM

Nts
 
Just be careful ordering from nts I am still £455 out of pocket no panels and cannot get a response from Nathen for the best part of 2 weeks I just hope he gets in contact soon if I loose that money it will seriously jepodise my build I simply don't know what to do

robo 15th July 2012 05:06 PM

Quote:

Originally Posted by PorkChop (Post 75922)
He told me that he intends to carry on doing bodywork when things quieten down unless someone makes him an offer he can't refuse for the moulds.

I was interested in the molds but nathan never got back with a figure. I was just going to throw them at a local lad who is shit hot with f/g to knock out what we will need for the three kits we are doing. They could have stayed with him to supply direct to anyone wanting panels. But from what I can gather it takes a day of frigging ,sanding and polishing to make a set fit to sell so the molds sound like scrap to me , its probably the reason spud had so many seconds to get rid of. I will probably just go to one of the new boys on the block and get one set to evaluate.

Bob

mgglep 15th July 2012 05:23 PM

Yes I wish I had but I already had a nose and scuttle and was unsure if someone else's bonnet would work I also wish I had done cash on collection

flyerncle 15th July 2012 05:42 PM

The only reason Spud had seconds is that perfect was nearly good enough...;)

PorkChop 15th July 2012 05:57 PM

Quote:

Originally Posted by mgglep (Post 75973)
Just be careful ordering from nts I am still £455 out of pocket no panels and cannot get a response from Nathen for the best part of 2 weeks I just hope he gets in contact soon if I loose that money it will seriously jepodise my build I simply don't know what to do

Hang on, you say here that you had a full refund...

I have bought stuff off Nathan with no problem whatsoever and I had the same experience with SSC.

Quote:

Originally Posted by robo (Post 75975)
I was interested in the molds but nathan never got back with a figure. I was just going to throw them at a local lad who is shit hot with f/g to knock out what we will need for the three kits we are doing. They could have stayed with him to supply direct to anyone wanting panels. But from what I can gather it takes a day of frigging ,sanding and polishing to make a set fit to sell so the molds sound like scrap to me , its probably the reason spud had so many seconds to get rid of. I will probably just go to one of the new boys on the block and get one set to evaluate.

Bob

Nathan did give me a figure in passing when I spoke to him a while back. I don't think it appropiate to broadcast that figure publically, so I shan't :).

I doubt the moulds are scrap. They have been used commercially for 4 (or so?) years so some wear and tear would occur. Don't forget that Mark Bean made the moulds, sold panels made from them and then sold the moulds to SSC prior to NTS having them.

Considering the size of a number of the panels, I can imagine that trimming and then polishing a panel to the point where it doesn't require paint is reasonably labour intensive. I own a fair few panels, a number of which were seconds from the SSC sale last year. Apparently my front wings were seconds, but I'll be damned if I can figure out why. My rear panel was sold as a second, but there's nothing 'wrong' with it. The gelcoat is a slightly different shade to the BS colour it was supposed to be, but you wouldn't tell by looking at it on its own. A lot of the seconds panels were damaged, usually on the edges of the gelcoat. I don't think that was to do with the moulds themselves, just accidents removing them from the moulds or from being moved around in the workshop.

mgglep 15th July 2012 06:07 PM

I was told by PayPal I would recieve a full refund when it had been processed (5 days) I assumed no problem days later I recieved another email stating that the refund would not refunded that was the best part of 2 weeks ago have emailed text rang pmed etc no reply. I totally agree with you regarding Saturn fantastic service as I have stated in previous posts

PorkChop 15th July 2012 06:14 PM

Did Paypal say why it wouldn't be refunded? I doubt Nathan has tried to screw you over...

robo 15th July 2012 06:29 PM

I dont know why nathan doesnt just contact all those that are owed goods/money and keep them in the picture. Its a phone call or email and it takes seconds, most customers dont give a shite about delivery times or problems that might delay the goods but what pisses people off is the silence.

Bob

mgglep 15th July 2012 06:59 PM

Its a phone call or email and it takes seconds, most customers dont give a shite about delivery times or problems that might delay the goods but what pisses people off is the silence.


Totally agree with the above
PayPal stated there was a problem at nathens end

PorkChop 15th July 2012 09:19 PM

Quote:

Originally Posted by robo (Post 75984)
I dont know why nathan doesnt just contact all those that are owed goods/money and keep them in the picture. Its a phone call or email and it takes seconds, most customers dont give a shite about delivery times or problems that might delay the goods but what pisses people off is the silence.

Bob

Very true Bob - Nathan should keep people in the picture. However, it's likely that Nathan is going abroad or it's possible that he's already abroad, so there is the possibility that he is totally in the dark about this.

mgglep 15th July 2012 09:49 PM

I truly hope so


All times are GMT +1. The time now is 07:21 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.