Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Chassis (http://www.haynes.co.uk/forums/forumdisplay.php?f=4)
-   -   my chassis pics (http://www.haynes.co.uk/forums/showthread.php?t=5429)

Andy_B 16th November 2010 10:11 PM

my chassis pics
 
4 Attachment(s)
Evening all....if i have done this correctly there should be some images of my tacked together chassis...The chassis was supplied by Saturn and i cant sing their praises loud enough ...the technical backup is superb ...the knowledge is phenominal ...if i had this kind of service in my day to day job my hair would still be the same colour and not falling out quicker than i can get to the barbers !!

Anyways the chassis is nearly formed a few wee bits need sorted around the tranny tunnel and i need to sort out that rear cage ...the bottom rails are a few mm out ...measured corner to corner every where today with the lazer tape borrowed on a long term basis from work !!! and i am at the most 2.25mm out....

PS this is the Nocost version of AVS hahah b'tard watermark !!

Wynand 17th November 2010 06:42 AM

Looks great. Nice to see a person using a centre line to work from:cool:

Talonmotorsport 17th November 2010 09:28 AM

What gearbox are you using? If you want to fit a type9 pedal box you have one of the U's around the bell housing in the wrong place.

gaz05 17th November 2010 09:34 AM

I wonder how many of us have made that mistake!

Talonmotorsport 17th November 2010 09:38 AM

Me more than once, you would have thought after building 20+ chassis I would remember where it goes by now.

Andy_B 17th November 2010 10:36 AM

Thanks i am using the MT75 gearbox and 2.0 DOHC engine..


All times are GMT +1. The time now is 11:11 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.