Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   General discussion (http://www.haynes.co.uk/forums/forumdisplay.php?f=10)
-   -   Parts Suppliers Thread - Who Sells What & How to Get Hold of Them (http://www.haynes.co.uk/forums/showthread.php?t=7367)

PorkChop 4th November 2011 09:46 PM

Parts Suppliers Thread - Who Sells What & How to Get Hold of Them
 
I'm sort of new to building kit cars and one of the things I have found is that finding out who sells what can take a considerable amount of time.

The idea of this thread is to create a directory of those companies/individuals who supply Roadster specific parts. This list may include general kit car parts (e.g. lights) suppliers at a later date, but there are numerous companies out there.

This list is not exhaustive and is for information only (this is not a recommendation thread, it is a directory) - I'd appreciate any input in adding to the list.

Roadster Specific

AGM Sportscars (bodywork). Barnsley, Yorkshire. www.agmsportscars.co.uk

Equinox Products Ltd (bodywork). Faversham, Kent. PM equinox on this forum, or http://www.equinoxproducts.co.uk/sho...php?groupid=18

GillhamOnline (Roadster parts). Colchester, Essex. PM GillhamOnline on this forum, or www.gillhamonline.co.uk

HandyAndy (Sierra chassis flat pack kits). Cleveland. PM HandyAndy on this forum.

Hydraulic For Kit Cars (brake and fuel lines). Växjö, Sweden. PM voucht on this forum, or https://sites.google.com/site/hydraulicforkitcars/

K4KEV (ali fuel tanks). Wingate, County Durham. PM K4KEV on this forum.

Rogue Engineering (misc parts). Doncaster, Lincolnshire. http://myworld.ebay.co.uk/daveo1121

Vodou Auto Kits (MX5 chassis, bodywork, misc parts). St Keverne, Cornwall. www.vodouautokits.co.uk


Non Roadster Specific

Aerodynamix (carbon fibre and fibreglass parts). Forest of Dean, Gloucestershire. http://www.aerodynamix.co.uk/

Burton Power (Ford supplies). Ilford, Essex. http://www.burtonpower.com/

Car Builder Solutions (lots of things). Staplehurst, Kent. http://www.cbsonline.co.uk

DanST Engineering (inlet manifolds etc). Baildon, West Yorkshire. http://stores.ebay.co.uk/DANST-Engineering

Europa (lots of things). Tutbury, Staffordshire. https://www.europaspares.com/

Kit Parts Direct (lots of things). Kingston upon Hull http://www.kitpartsdirect.com/

Kit Spares (lots of things). Nottingham. http://www.kitspares.co.uk/

Protech Shocks (dampers and springs). Melksham, Wiltshire. http://www.protechshocks.co.uk/

Rally Design (lots of things). Swalecliffe, Kent. www.rallydesign.co.uk

Stafford Vehicle Components (lots of things). Tamworth, Staffordshire. http://www.s-v-c.co.uk/

Woolies (Trim). Peterborough. http://www.woolies-trim.co.uk/



Hope this is of help to someone out there :)

robo 5th November 2011 09:40 PM

Good idea but this post will get buried. Need to find a way of keeping it within easy reach:(

Bob

PorkChop 6th November 2011 10:48 AM

Quote:

Originally Posted by robo (Post 67556)
Good idea but this post will get buried. Need to find a way of keeping it within easy reach:(

Bob

Ash did say that he would make the this thread a sticky so it wouldn't get lost :)

PorkChop 13th September 2012 06:56 PM

List updated :)

robo 13th September 2012 07:11 PM

Quote:

Originally Posted by PorkChop (Post 77914)
List updated :)

You forgot to add equinox, iz it cos we iz darn v sarf:)

Bob

PorkChop 13th September 2012 07:17 PM

Quote:

Originally Posted by robo (Post 77916)
You forgot to add equinox, iz it cos we iz darn v sarf:)

Bob

Good point Bob, I suppose I should remove SSC as well...

The V8 Files 13th September 2012 07:22 PM

Yep, good idea definitely, the forum could do with an info category with only stuff like this and the book amendments etc in. If it was made read only and only mods could move stuff into it then it wouldn't get cluttered like the announcements one does.

Bruce

PorkChop 13th September 2012 08:04 PM

More updates - if anyone has any suggetsions, feel free to well... suggest :)

ozzy1 14th September 2012 01:51 AM

Burton power for all things Ford ;

http://www.burtonpower.com/

shh120m 16th September 2012 11:14 AM

Kevin at protech is a good bloke, very helpful especially if you need something a bit different, he knows the correct sizes for the mx5 chassis too

protechshocks.co.uk


All times are GMT +1. The time now is 06:09 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.