Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Bodywork and interior (http://www.haynes.co.uk/forums/forumdisplay.php?f=8)
-   -   Seats (http://www.haynes.co.uk/forums/showthread.php?t=5482)

TSM Locost 16th August 2012 09:27 AM

Seat pads, can be made to your size, http://www.tigerracing.com in the online shop.

DavideM 29th December 2019 07:13 PM

hi Alga,

with a "little delay"... just 10 years from your post... today i tested my 1.5mm mild steel rorty seat.
here is the picture:

https://drive.google.com/file/d/1JPz...ew?usp=sharing

i have to open shoulder's wings a bit, for me is too strict.
at the moment the general feeling is good about the position, not so good about the rigidity. but i still have to weld the doublers all around the perimeter. i will start adding 1 doubler outside, if still be too flexible i will add another inside. i think also the mounting plates need to be reinforced a bit, thinking about weld large inox washers around the holes..

at the end i will also "bomber-ize" the 50mm holes with a dimple die. this should give a little more rigidity.

anybody can post some pictures about upholstery"for idiots"? i found something in youtube but.. very complicated in one side/very different kind of seats in the other.

David

Quote:

Originally Posted by alga (Post 49360)
I would suggest looking at the Rorty Design seats, they seem to be a bit more refined that the book ones. The drawing is available for free at the Rorty web site: http://www.rorty-design.com/files/Ro...%20Pattern.pdf

Rorty specifies 2.5 mm 5052 or 5251 ally, which should be equivalent to about 1.2 mm mild steel. Could any engineers confirm or correct?

Update: I found on the internets that substituting ally for steel sheet reduced the weight by a factor of 2, which means that the seats have to use 1.6 mm sheet and will weigh about 9 kg each. flyerncle, you were spot on!



All times are GMT +1. The time now is 12:40 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.