Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Chassis (http://www.haynes.co.uk/forums/forumdisplay.php?f=4)
-   -   Wishbone brackets (http://www.haynes.co.uk/forums/showthread.php?t=13990)

dean211277 2nd November 2016 03:06 PM

Wishbone brackets
 
Hi,
Just been out lining up the wishbone mounting brackets on the chassis. However, I have found a problem with them when placed on a flat surface the centre of the holes are about 34mm from the lower edge the book states this should be 30mm.
Effectively this is going to make the wishbones sit 4mm further away from the chassis.
Is this an issue?
Am I going to have to order a full new set?
Cheers Dean

vmax1974 2nd November 2016 10:01 PM

Where did you get them from

dean211277 3rd November 2016 09:04 AM

I bought a set of unused 2nd hand plates and all the brackets from eBay. Maybe a daft idea in hindsight.


All times are GMT +1. The time now is 05:10 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.