Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Running gear (http://www.haynes.co.uk/forums/forumdisplay.php?f=5)
-   -   rear uprights for sale (http://www.haynes.co.uk/forums/showthread.php?t=3082)

georgenewman1 16th November 2009 04:28 PM

rear uprights for sale
 
hi guys anyone want to buy a set of gts's rear uprights, they are not exactly to book spec but i have taken this up with him and am assured that they will work fine. paid about £100 but open to sensible offers, cheers :)

georgenewman1 16th November 2009 04:30 PM

plus postage

RAYLEE29 16th November 2009 04:41 PM

Hi, it might be an idea to let people know exacatly how or why they are incorrect then they can make an offer
Ray:)

georgenewman1 16th November 2009 04:51 PM

the tube is smaller than specified in the book so the holes bottom out on it, but i have been told that many people have used them, i ended up with 2 sets thats y i didnt use them, il try and get some pics up soon

londonsean69 16th November 2009 05:05 PM

Quote:

Originally Posted by georgenewman1 (Post 25125)
hi guys anyone want to buy a set of gts's rear uprights,

Quote:

Originally Posted by georgenewman1 (Post 25130)
but i have been told that many people have used them

Did Darren tell you this?? Because if so then I would strongly suggest putting up a set of pics, with a load of dimensions on them.

He will say anything to make a sale:mad:

georgenewman1 16th November 2009 05:07 PM

ye did have a bit of a dispute and only got half the order to, but got the cash back on the missing stuff in the end

NEroadster 18th November 2009 01:44 PM

Which Tube is too small, I think we need a bit more information

georgenewman1 18th November 2009 04:35 PM

its the 5" dia. tube it actually falls rite in the middle of the pcd of the bolt holes, sorry im between two houses at the moment so cant get tot he parts but il take pics and measurments when i get home, cheers guys

fabbyglass 18th November 2009 06:30 PM

Sounds like the ends are being used from the de dion tube.......now I made that for GTS about 6 years ago even though he will suggest otherwise...:D
There should be some cut outs in the 5" dia tube to allow the bolts to miss the tube.

fabbyglass 18th November 2009 06:34 PM

It was done to cut weight as the bigger tube weighed a ton, in fact I made few by rolling 3milly plate instead of buying in huge heavy gauge tube but that got a bit of a ball ache so went for the heavier tube.......:D :D


All times are GMT +1. The time now is 11:18 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.