pedal bushes, tube or not?
just making my pedal bushes. Should i make them the same way as the suspension, in 2halfs with a lip and stainless steel inner or just a solid cylinder with 8mm hole?
|
Quote:
Something like this: http://www.directplasticsonline.co.uk/PTFERod/25mm/ Regards.....Andrew |
got some tough nylon (i think) blocks at work i can turn down. Just dont know if i should put a tube in aswell.
|
Yes, it is a good idea to put a crush tube in the bush. This allows you tighten the bolt up fully and still be able to rotate the bush on the crush tube. Otherwise you will have to only partially tighten the bolt and use a Nylock or similar - Although this works, it does not make the strucutre as stiff as it is when the bolt is fully tightened.
|
Cheers matey
|
All times are GMT +1. The time now is 08:54 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.