Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Electrics (http://www.haynes.co.uk/forums/forumdisplay.php?f=7)
-   -   How do i wire this capri dash up (http://www.haynes.co.uk/forums/showthread.php?t=13175)

waynes world 20th February 2014 11:12 AM

How do i wire this capri dash up
 
Hi all, still trying to find out about the wiring for the capri rev counter i have. This is the pic of the back where the 3 connectors/nuts are, all i need to know is where to connect the wires on the car running a 2l pinto, i am only using the rev counter aswell with speedo so i am not using the loom or plug

Please can anyone help, i dont want to mess about as i dont want to damage it.

thanks

wolly


waynes world 21st February 2014 06:39 PM

Please anyone help

Shorty 21st February 2014 09:57 PM

I probably can't help much but I'm guessing those colour markings are not referring to the 3 connectors you need?
As far as I'm aware it will need a positive, negative and a feed from coil.

baz-r 22nd February 2014 09:21 AM

brown is usually + fused permanent live on a ford

an old haynes manual will be your best place to look

waynes world 22nd February 2014 05:09 PM

The colours marked on the back are the colour wires on the connector plug, all i have found is that the green goes to - coil, the others i dont know, i have a haynes skematic diagram that some body gave me but we cant find the rev counter on it.
So if the green is the coil- then i need an chassis earth and a ign + ??


All times are GMT +1. The time now is 12:13 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.