Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Engine/transmission (http://www.haynes.co.uk/forums/forumdisplay.php?f=6)
-   -   gearbox sensor wiring (http://www.haynes.co.uk/forums/showthread.php?t=13811)

RichardH 18th January 2016 09:24 AM

gearbox sensor wiring
 
can anyone tell me the wiring colours to the neutral and reverse sensors on the mx5 gearbox, the sensors have green wires but the other four wires from the loom to these connectors have corroded and fallen out the plugs so i don't know how to reconnect them, i have the haynes manual but that part of the loom isnt shown in the diagram.
cheers

Baz1 18th January 2016 02:47 PM

Gearbox switch wire colours.
 
Hi Richard,
My donor vehicle is a 1996 1.8 mx5 5 speed. The switch mounted on the drivers side of the gearbox has brown/white and black wires and the switch mounted on the passenger side has black/yellow and red/green wires. Hope this info helps.

RichardH 18th January 2016 04:58 PM

thanks for that i will go check later.

garyt 18th January 2016 06:54 PM

on my 1.8 2003 5 spd
reverse switch is black/yellow and red/yellow
neutral switch is violet and black
this is the same on a 2001 1.8 5 spd wiring diagram
good luck


All times are GMT +1. The time now is 07:29 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.