|
hi looking good just watch the repeater position with them on the scuttle, looks like your making good progress
|
cheers
I am in doubt about the indicators on the scuttle where they are I might need to get some longer ones https://www.flickr.com/photos/124541083@N02/ |
Quote:
See my thread on exactly this issue.... http://www.haynes.co.uk/forums/showp...&postcount=419 edit: I have these for sale with the resistor blocks if you're interested, pain in the arse but removable and only a 4mm hole needs drilling. http://www.haynes.co.uk/forums/showp...&postcount=431 |
Thanks for that Chris I just had a look through the IVA manual and I get what your saying now it is the view from looking over the rear wheel arch with the 5dec.
next one is but might sound a bit stupid how do I put photos up as ever time I try it keeps saying my file is to big exceeds the 19.5kb https://www.flickr.com/photos/124541083@N02/ |
Right it has been a very long time since my last up date and with the site play up over the weekend I thought I better get one in quickly. Any way my build is still going even thou I had my first night in the garage last night for 2weeks. one week out the garage to keep the misses happy then a nice weeks holiday. Any way I had to modify my rear wheel arches and make then wider. I put them back on and then decided to paint all the aluminium panels witch was going to be an after IVA but I'm glad I done it because I'm well happy with the way it turned out. currently making some trim peace's to go around the cockpit to give it a nice finish.
https://www.flickr.com/photos/124541083@N02/ |
Well time for a little up date. I had some go intentions to spend the day in the garage yesterday. so I started my first 2 hours by giving the garage a good clean had some launch then the missis was feeling a bit ill so I ended up looking after the kids for the afternoon but I did make it back in in the evening so I've made some nice aluminium finishing trims and I've also made my bake cover / boot lid. I doesn't sound like much but all the finishing bits seem to take forever.
https://www.flickr.com/photos/124541083@N02/ |
looks good, :)
I know what you mean all I seem to be doing is little fiddly jobs just now and I keep finding more mmmm ...... like when you see someones boot cover and think "I hadn't even thought about that !" :) keep up the good work |
Hi Matt, Your car is looking superb, I'm quite envious!
Could I enquire please what headlights you've used please? |
Quote:
https://www.flickr.com/photos/124541083@N02/ |
Well time for a little up date. Not much happened lately but I have finish modifying my rear arches and they are now fitted back on as a finish item (hope I don't need to take them off again). I'm still not too sure about what I have done so I might change them after my IVA but It might grow on me..so also started to rewire the lights but then my back gave in so ill do the other side tonight.
https://www.flickr.com/photos/124541083@N02/ |
I quite like the rear arches. Looks like you have done a nice tidy job there.
|
well time for a little update.
I've finished or started and finished my front wheel arch brackets and mounted my arches. Just got one arch left to put some edging trim on quite a fiddle job to get them looking the same from one side to another. spent a few hours in the garage yesterday and made a cover box and mounted my fuse box and brake reservoir in it looks ok. connected my last brake lines to the peddles just need to get some brake fluid on the way home tonight and I will try to bleed my bakes. one thing I am thinking of doing is to mount my side repeaters on the front arches for the IVA angle thing and also mount my front indictors on the top of the arches but not sure what to do there yet. https://www.flickr.com/photos/124541083@N02/ |
Quote:
|
Well little up date.
Whilst working on my roadster last week bleeding my brakes I kept looking at my dash which I covered in vinyl. The vinyl looks ok but it kept pealing of the bottom radius. One of my After IVA things was going to be to Carbon skin the dash but last week I thought sod it I'm doing it now and bought some materials. So I spent my time in the garage over the weekend skinning my dash and polished it up last night re dressed it and sort of put it back into the car and I must say looks much better and I'm glad I done it now and not after. One thing I did do whilst connecting the hazards up I brushed one of the terminals fiddling around and blow something somewhere but my fuses haven't blown. Random and cant find where so my indicators are not working now and the hazards. https://www.flickr.com/photos/124541083@N02/ |
Well I must say it has been quiet on my build for the last 2 mouths ( work commitments ). Any way I have spent a few hours in the garage over the Christmas brake not as much a I would like but maybe some more time today hopefully. Any way I'm trying to get it finished by the end of March so I can go for IVA then try and get to stoneliegh with it. That the plan anyway.
https://www.flickr.com/photos/124541083@N02/ |
its good to get something done even when it doesn't seem like much I'm secretly hoping to be ready for iva @ march / april time too, I've been lucky in that I've been able to get a fair bit done over the hols.
Did you get your indicators / hazards all working again? Keep up the good work |
Yep my hazards are all working but I'm still not sure as I need to make some changes for positioning them
https://www.flickr.com/photos/124541083@N02/ |
yes in your pictures you have your repeaters on the scuttle, some have failed with them here due to the viewing angle being blocked by the rear arches, I put my repeaters on the outside edge of the front arches.
Are your front ones far enough out ( in from the outside edge) ? I am hoping my front indicators are visible at the required side angle , I've tried to measure the angle and check and " I think they are ok " so we will have to see on that one :) I mounted mine on the widest part of the nosecone By the way I like how you did your roll bar, |
I'm thinking of putting a turbo on mine after but I'm not sure to go turbo or supercharge. What is the charger from?
https://www.flickr.com/photos/124541083@N02/ |
I think my front indicators are to far in and I'm thinking about putting them on the front wheel arches and my side repeaters are to low to see over the rear archers. I don't know weather to move them up or put them on the Side of the front arches as well.
https://www.flickr.com/photos/124541083@N02/ |
hi your front ones can you not measure how far out they need to come and then make some extensions, (westfield do longer ones the same as yours for their widebody) this would save you having holes from where they are now if you move them, repeaters "probably" have to go on the edge of the front arch
|
Well little update spend some time in the garage this week and hopfully this weekend but I have made the top of the tunnel and carbon skinned it well happy and also made the alloy trim and polished them.
https://www.flickr.com/photos/124541083@N02/ |
So didn't spend any time in the garage this week but did manages a few hours today as I had the day off. So I managed to finely get my tunnel covered and I'm well happy I with it now to start all the loose end and get them done.
https://www.flickr.com/photos/124541083@N02/ |
Looking real smart now mate, it's a real tidy build! Have you got your IVA booked yet?
|
Cheer Rosco.
No I haven't book it yet going to apply for it at the end of February for the test end of March that is what I'm planning and working towards. https://www.flickr.com/photos/124541083@N02/ |
Well little up date.
Iv managed to spend some time over the week end in the garage and sorted a few things and found a few gremlins. The seats are now bolted in with the harnesses. The drive seat is on sliders and the passenger is just bolted down. Iv also put some hinges on my boot lid and fitted some locks just need to Put something under Neath for them to catch against. The gremlins are from the indicators they were once working and I started to fit the side repeaters onto the front arches went to try them and nothing fuses are ok and iv now narrowed it down to the flasher box. Think I blow it up some how when trying to get my hazards to work. On the plus side my to do list is getting sorter. https://www.flickr.com/photos/124541083@N02/ |
hi glad your getting on are your indicators / repeaters all bulb or led or a mix?
Mine were a mix so I used a flasher unit from cbs that does both or I have some unused ballast resistors here if you want foc My list is getting shorter too and took the car from house to a big car park on sat morning , it showed up a couple of issues and its going to the local garage in 3 weeks for a shakedown, emmisions, brakes, light aim. Keep up the good work |
Cheers Gary.
I did see you went out for a spin looking good. My indicators are all bulbs I haven't check them but might be good to check. There is no click from the flasher box so that is why I'm thinking that is the problem. https://www.flickr.com/photos/124541083@N02/ |
Right iv had a little time in the garage over the weekend sorted a few issues out so I'm glad about that. That means my to do list is getting smaller. Iv also took the car out on the road for the first time even if it was to turn it around into the garage I think it still count. Most of this weeks work will be to make a few supporting brackets for the engine bay and give that a clean up.
https://www.flickr.com/photos/124541083@N02/ |
Exhaust parts
Hi Metal Matt hope to get working on my car after a few years break.Can you give me the name of the place you got the parts for your exhaust box and tail pipe
|
Hi Martin
I got my parts from uk exhaust parts http://exhaustpartsuk.com and I got my CAT from eBay https://www.flickr.com/photos/124541083@N02/ |
Exhaust
How well does the box work at keeping noise down as its sealed (not re-packable) and did you buy or make the tailpipe yourself. Any pics of how you mounted it.Aidan
|
I think the box is ok little vid of it running https://www.youtube.com/watch?v=cBIe8yulbSk. I bought the tail pipe as a straight peace then welded a bend to the end of it then ground the weld down and polished it up. the rear mount I welded a tab on underneath the exhaust to avoid sharp edges and another coming out from under the car with a rubber mount.
https://www.flickr.com/photos/124541083@N02/ |
A little vid of my first drive https://youtu.be/f6QzcI-LtZw
https://www.flickr.com/photos/124541083@N02/ |
Exhaust
Thanks for the videos I will get one ordered up not too loud.Aidan
|
well little up date ticked a few more thing of on my to do list and finished filling in my IVA application form just got a few thing I would to do before I post it of. The thing I want to do before posting is try and get my engine light to go out so I need to find out the codes from the ECU sort them out then I will be happy to post it of.
Got to keep pushing now I'm on the last hurdle. https://www.flickr.com/photos/124541083@N02/ |
Well done, your cars a stunner and I hope you have a smooth test especially with summer just around the corner. That's a nice daydream, those first journeys in the sun!
|
good to hear it, You can put an available from date on the forms this then gives you a deadline to aim at :)
It really is a great incentive spring on the way |
Well spend a few hours in the garage over the weekend and got a few little jobs done and finished. I made a list of some parts needed to finish of a few thing and got them ordered up this morning. The mane thing is the
"to do list" is getting shorter. The IVA forms are all filled in and in an envelope ready to go I just cant bring myself to putting it in the post yet but in reality I should get the ball rolling. https://www.flickr.com/photos/124541083@N02/ |
All times are GMT +1. The time now is 09:16 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.