Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Chassis (http://www.haynes.co.uk/forums/forumdisplay.php?f=4)
-   -   3d cad (http://www.haynes.co.uk/forums/showthread.php?t=3265)

fabrun 20th December 2009 05:32 PM


alga 22nd December 2009 12:55 AM

The upright measures 154-155 mm along the kingpin axis. See http://fridge.pov.lt/~alga/DSC_9346.JPG . The mushroom insert sticks out by 8 mm extra. The kingpin axis has a caster angle and the kingpin inclination, you can measure them approximately on the drawing on the page 75 of the book.

fabrun 22nd December 2009 04:23 AM

thanks a lot

LeonN 22nd December 2009 09:04 AM

It is all looking good man. There is a plan of seirra hubs compleat with mesherments some ware. Quick surch has found it for me umpteen times.

The peddal box: need a hydrolic clutch for BMW bits. The BMW one can be fabricated into the book box quite easaley.

fabrun 22nd December 2009 10:30 AM

thanks again
i 've found him


can i re use the hydraulic clutch from the bmw with this pedal box?

LeonN 22nd December 2009 01:23 PM

Yer you can. I made a bracket to hold the mastersilinder to the pedal box and drilled a hole a bit biger than the cilinder but smaller than the boot making for a nice tight fit. I'll try and find a pic.

LeonN 22nd December 2009 01:31 PM

boath BMW brake and clutch. You can just see the bracket poking out. Pm me if you won't a better pic or some dimencions for your cad.

fabrun 23rd December 2009 11:14 AM

chassis in video

bobbyh 24th December 2009 10:59 AM

any chance of a copy of the model? thanks

fabrun 24th December 2009 11:11 AM

i share (with everyone)
just send me a pm with your email
the 3d format you want
precise only the chassis or all the part

i'll can give everything which inside the book

All times are GMT +1. The time now is 04:21 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.