Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Bodywork and interior (http://www.haynes.co.uk/forums/forumdisplay.php?f=8)
-   -   Bodywork seconds (http://www.haynes.co.uk/forums/showthread.php?t=14190)

bentovey 22nd October 2018 07:45 PM

Bodywork seconds
 
Hi all,
Does anyone know where I can get bodywork seconds from?
I need everything really, I would even consider cracked / damaged panels
Many thanks
Ben

twinturbo 24th October 2018 09:18 AM

equinox perhaps...

TT

Numplumb 25th October 2018 12:34 PM

Hi Ben be careful if you buy parts from different people there is different styles that won't match each other Eqinox panels are a little bit higher than other makes which works out better for engine clearance, the scuttle is shaped a little bit different from other makes the engine side of it seems to be less of a slope.
Imo Eqinox are the best.
Regards Mick.

bentovey 25th October 2018 10:58 PM

I might be getting a nose and tub from equinox. Watch this space

Hugh Paterson 20th November 2018 07:40 PM

I used to build grp body work for a variety of 7ís I have a few bits n bods in storage at back of my shed still have some of the mould tools as well just sold some front wings when some9me msg me last week we wot I had

Hugh Paterson 20th November 2018 07:58 PM

Thereís prob some rear wings in the moulds ( 2 styles) defo front wings prob a bonnet and two styles of front nose cone that would prob fit a Roadster. We used to build complete Roadsters but I split with ex partner and work on my own now. Kept the tooling for my own car :) will take some pics see if any of itís any use too u.. do u know what width front and rear arches u need?

bentovey 21st November 2018 10:45 AM

Hi Hugh pictures would be great,
Iíll check what arches I need tonight Iím running 205 tyre front and rear if that helps. Chassis is a talon tmxr Iíll measure that tonight too

Hugh Paterson 21st November 2018 06:20 PM

Be Friday before Iím back at boatyard where I keep all my tooling will get pics then, if u have Facebook I have archive photos on my page u can have a decko at. I have 205 front wings not sure what colour they are. Do U intend to paint the body work?

Hugh Paterson 21st November 2018 06:22 PM

Will check width of rear arches while Iím at it Ben...cheers meantime

bentovey 22nd November 2018 08:21 AM

All bodywork will be wrapped or painted but in all honesty it will probably go to IVA as is.
Many thanks
Ben


All times are GMT +1. The time now is 09:15 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.