Engine to far back??
 

Think I've made a boohoo here

[/url]

OOPS
yep she needs to go forward a tadge :)

I did that as well - oops!

Well my job for tomorrow is
Lift engine/box cut off mounts and reposition everything
Give me something to do while I'm waiting on my turbo manifold anyway

What a burger,think I would tempted to trim and strengthen the arm to try and clear it to get the travel.

Or drill holes further forward on the plates that are on the chassis

I ended up taking engine and box out and repositioned the mounts
At the same time I'm moving the engine over towards the passenger side slightly
To give me more clearance under the bonnet

Yes mine is offset slightly to the near side to clear the plenum

Perhaps this ought to be put out as good advice, mount the engine farther forward and slightly towards the nearside, as I did as well, second time of fitting, to clear clutch and in my case brake master cylinder

I think it should be included in the new version of the Haynes book if it ever gets reprinted

Steve