Steering Rack Brackets
1 Attachment(s)
I have just got around to test fitting my steering brackets, and seem to have a lot of play in the narrow bracket.
Can anyone tell me what inside height of this bracket should be, have attached a picture of the measurement i need. Attachment 770 Thanks for the help in advance :D |
there is meant to be a grey nylon packer with that mount to take up the slack
|
The dimension A is 37mm,but as ash says there is a grey packing piece which is 29 x 26 x 5.8mm.
|
There's supposed to be a......Oh Bu***r...:D
There Is a thinner one on the other side... |
Did you get them off us TK, as said there should be 2 spacers in the packet.
You could always use some steel plate as spacers to get them tight. AndyH |
My problem it's seems is that i have the spacers missing.:mad:
Spud i bought the brackets from ebay before you started selling them, i have contacted the seller, but don't hold out much hope of getting them. Will give it a few days then make up the spacer myself. Thanks for the help :D Terry |
Got home from work tonight , to find a padded envolope with two spacers in it from the guy i bought the brackets from and a cheque for a refund for postage for the brackets as an apologue.:D
What a nice bloke, well chuffed :D :D |
All times are GMT +1. The time now is 02:14 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.