Haynes Forums - MX5 Engine Mount Hole Spacing?

Haynes Forums (http://www.haynes.co.uk/forums/index.php)

- Engine/transmission (http://www.haynes.co.uk/forums/forumdisplay.php?f=6)

- - MX5 Engine Mount Hole Spacing? (http://www.haynes.co.uk/forums/showthread.php?t=13586)

skov	27th January 2015 01:32 PM

MX5 Engine Mount Hole Spacing?

Hello all,

Just wondered if anyone happened to know the distance between the three holes on the MX5 engine mounts? (for both sides, as I think they're slightly different).
Or had some lying around and could measure for me?

Thanks!

Stot	27th January 2015 01:48 PM

1 Attachment(s)

I have this if it helps. The slotted hole has the bolt to its inward side when fitted.

You can measure in Adobe Reader in theory. Edit -> Analasys -> Measuring tool.

I make it 45mm centre to centre vertical and 102mm centre to centre horizontal to the start of the slotted hole and 108mm to the centre of the end of the slotted hole.

Cheers
Stot

skov	27th January 2015 01:54 PM

Perfect! Cheers Stot :D

CTWV50

27th January 2015 10:43 PM

Quote:

Originally Posted by skov (Post 99797)

Perfect! Cheers Stot :D

What you up to?

skov	27th January 2015 10:50 PM

Quote:

Originally Posted by CTWV50 (Post 99799)

What you up to?

Nothing very exciting, just making some new engine months after one of my old ones failed:

http://www.haynes.co.uk/forums/showthread.php?t=13553

CTWV50

27th January 2015 11:04 PM

Quote:

Originally Posted by skov (Post 99800)

Nothing very exciting, just making some new engine months after one of my old ones failed:

http://www.haynes.co.uk/forums/showthread.php?t=13553

Ahh I see.:eek:

All times are GMT +1. The time now is 07:31 PM.