Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   SVA/Legal (http://www.haynes.co.uk/forums/forumdisplay.php?f=9)
-   -   Few IVA Questions (http://www.haynes.co.uk/forums/showthread.php?t=13540)

CTWV50 30th November 2014 06:47 PM

Quote:

Originally Posted by ayjay (Post 99358)
I had trouble getting any advice from Chadderton.
However at test they were very helpful and reasonable.
Asked if I had locked threads on calipers and seat belt bolts . I also made sure the blue stuff was visible on end of thread;)

Thanks ayjay, I'd not done this. I will get this done soon.

Davidbolam 30th November 2014 06:50 PM

Quote:

Originally Posted by CTWV50 (Post 99374)
Thanks ayjay, I'd not done this. I will get this done soon.

My tester asked what locking device had been used on the vertical bolt that goes through the bottom mx5 ball joint. I used the nut lock glue stuff but had I thought about it a bit more would have made sure there was plenty blue on display.

David

CTWV50 30th November 2014 07:04 PM

Quote:

Originally Posted by Davidbolam (Post 99376)
My tester asked what locking device had been used on the vertical bolt that goes through the bottom mx5 ball joint. I used the nut lock glue stuff but had I thought about it a bit more would have made sure there was plenty blue on display.

David

oh I've used a nylock nut there. :)

SeriesLandy 30th November 2014 07:24 PM

Anything that I loctite'd I took a photo of to show that it had been.

CTWV50 23rd February 2015 10:13 PM

Good test day write up here.

http://www.detailingworld.co.uk/foru...ield&page=2 7

CTWV50 24th February 2015 10:28 AM

Another good read.

http://www.tamarisktechnicals.com/pages/iva.html

CTWV50 24th February 2015 10:30 AM

Another that mentions side light tell tale fail.

http://www.locostbuilders.co.uk/foru...php?tid=146174


All times are GMT +1. The time now is 06:20 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.