Sierra M/C oreintation
 

Hi

Could some body tell me as if this the correct way to run the brake pipe from the Sierra's master cylinder to the front and the rear pipes.

There are 3 ports from the M/C , the one at the back to the back wheels and the 2 at the front one to O/S and the other to the N/S?

Dead right with your last paragraph.Back to rear front to left and right.

as Flyerncle has said, just a little further info......

the forward union is off side front
center union is near side front
rear union is to the rear T piece

as when flyerncle & i stripped my car, i bent the bits of cut brake pipe that was still attached to the M/C in the direction they were originally feeding to.;)

andy:)

"as when flyerncle & i stripped my car" ? You went home !

cheers lads much appreciated!

:o :D oh yeah i did didn,t I ???

but YOU sent me home, by the time i got back with my van you had practically finished stripping the car,
remember the look on my face??:eek:

but i do remember bending the bits of brake pipe on the M/C :p

andy

:confused: Sorry to be thick, but when you say forward union do you mean the one closest to the pedal or closest to the front of the car?

No probs Jimbo,rear single hole to back, double holes to left and right front.

the forward union is the one closest to the front of the car, sorry i should,ve made that clear in my reply earlier.

cheers
andy:)

When I said go and get the van I never meant for you to walk down the A19 !

Sweet, thanks for clearing that up so swiftly ;)

Jimbo

You tell him Paul :D :D

What's with all that we stuff :D

Don't forget, Andys van only does 40mph flat out :eek:

:D
but i had to get the train & then drive my LDV van back to you, maybe i would,ve been quicker if i had walked :o LDV vans have 2 speeds only,,, slow
& dead slow :D

andy

I am sure he did it on purpose Ronnie and He bites so easy thats why I am on his case.
I have been at VOSA for two days,so I need a little entertainment !

We did this,we did that. He tells a good story.

Ohhh Nooooo ..................... Not a Two day course just to show that you still know what you have known for years :eek: :rolleyes:

Bait the hook & reel em in :D :D

Fraid so !

All credit to the trainer ( did last 5 year one ) he did point out a few things I did not know about computerisation and things you could and could not do.

At least it was a few days away from the same old, same old. :)

The lads at my local VOSA station are a great bunch.

The tester who done my class7 Transit test this year even took the time to show me a fault on my Ford VVcarb :cool:

Paul, am i that easy a target????:o :eek:

Ronnie...... i did take the steering column out & swept the floor then mopped it too ........

then WE "towed" the shell away.........well Paul towed it & i helped the shell turn the corners :D :D

andy

"Paul, am i that easy a target???? "

See what I mean.....

Under supervision Andy !

Correct again Ronnie,at least they are more tester friendly these days and there is less of "Them and Us" but they are still The Ministry.

Andy, I am only tugging your chain matey.

:p :p

andy

i,m saying NOWT :D

Best not too,I am off to bed !