Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Announcements (http://www.haynes.co.uk/forums/forumdisplay.php?f=2)
-   -   Mx5 mk3 build (http://www.haynes.co.uk/forums/showthread.php?t=13262)

chris_smith 6th May 2017 07:55 PM

Hi Matt, just been going through your build pics it looks like a really tidy build, but id like to know what trim you used for the tunnel? many thanks
chris

metal matt 9th May 2017 08:53 AM

Quote:

Hi Matt, just been going through your build pics it looks like a really tidy build, but id like to know what trim you used for the tunnel? many thanks
chris
Hi Chris.
The trim along the tunnel is 1.5 mm thick aluminium. I had some left over bits during my build so I cut them into 40mm strips and folded them over some 1" box. Them I re marked them and trimmed them back. Once that was done I then sanded the sharp edges down to a nice radius and wet and dry to a smooth even finish they a lot of hare work polishing. I then fixed them down to the chassis with some counter sunk m4 bolts This also passed the IVA for all the radius test. Hope that helps.

Eternal 14th July 2017 07:34 PM

Hiya! Awesome build!

What are the spec of the parts used for your exhaust trying to workout what parts to get from exhaustpartsuk for my build. like size and length of tail pipe ect. Thanks!


All times are GMT +1. The time now is 09:18 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.