|
The upright measures 154-155 mm along the kingpin axis. See http://fridge.pov.lt/~alga/DSC_9346.JPG . The mushroom insert sticks out by 8 mm extra. The kingpin axis has a caster angle and the kingpin inclination, you can measure them approximately on the drawing on the page 75 of the book.
|
thanks a lot
|
It is all looking good man. There is a plan of seirra hubs compleat with mesherments some ware. Quick surch has found it for me umpteen times.
The peddal box: need a hydrolic clutch for BMW bits. The BMW one can be fabricated into the book box quite easaley. |
thanks again
i 've found him http://www.haynes.co.uk/forums/showt...ght=sierra+hub can i re use the hydraulic clutch from the bmw with this pedal box? |
Yer you can. I made a bracket to hold the mastersilinder to the pedal box and drilled a hole a bit biger than the cilinder but smaller than the boot making for a nice tight fit. I'll try and find a pic.
|
boath BMW brake and clutch. You can just see the bracket poking out. Pm me if you won't a better pic or some dimencions for your cad. |
chassis in video
http://www.youtube.com/watch?v=5LYcZ2m1nMU |
any chance of a copy of the model? thanks
|
i share (with everyone)
just send me a pm with your email the 3d format you want precise only the chassis or all the part i'll can give everything which inside the book |
All times are GMT +1. The time now is 05:15 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.