I've been scrounging to get good copies of the Mazda diagrams, but I think I'm going to spend the time color coding them (the ones I have are all black and white). I also labelled everything as I took it out of the car, so hopefully that will help the process. I am intimidated though!

the wiring diagrams are black and white or the loom is all black and white

Untitled by stephen harborne, on Flickr
Finished the fabricating on the expansion tank bracket

Untitled by stephen harborne, on Flickr

Untitled by stephen harborne, on Flickr

Untitled by stephen harborne, on Flickr

Bracket for top hose
Cooling system nearly finished i just need a new thermostat and a few jubilee clips

Untitled by stephen harborne, on Flickr
I had to move the steering wheel a bit closer to the seat
Untitled by stephen harborne, on Flickr
And i made a supporting bracket for the steering shaft
Untitled by stephen harborne, on Flickr
And i tacked the steering shaft extension in place

Untitled by stephen harborne, on Flickr
More wiring
Untitled by stephen harborne, on Flickr
I got my rear lights they are for a defender
I got all clear ones
Untitled by stephen harborne, on Flickr
Mounted my maf using some turbo intercooler piping
Untitled by stephen harborne, on Flickr
Mounted my fan aswell

Chipping away at it ;)

Are the lights 'E' marked?

TT

As well as E marked ensure that the fog light has an f or a b mark as well as mine failed the test on the first visit

Arfon

The wiring loom is color of course, but the diagrams I have are black and white print. They have codes, but not easy to work with...

Been away from the build for a while
Next on the list was too hinge the bonnet at the front
So i made a steel frame for the front of the nose cone which i riveted in place the fibreglassed over to give strength

Untitled by stephen harborne, on Flickr

Untitled by stephen harborne, on Flickr

Untitled by stephen harborne, on Flickr

Untitled by stephen harborne, on Flickr

Bonnet now in place

Untitled by stephen harborne, on Flickr

Untitled by stephen harborne, on Flickr

Bonnet in place passenger side gap to scuttle panel

Untitled by stephen harborne, on Flickr

Drivers side gap
This will not do
Untitled by stephen harborne, on Flickr