Throttle cable MX5
I assume many if you have solved the same issue so though I'd put it to you all. I need a longer cable for my TMXR build, looking at and measuring the old one I need a 2mm inner cable with a barrel nipple 6mm Dia 10mm wide, is this combination like rocking horse s**t or is it just me. My ideas so far are get a thinner cable, a larger barrel and file it smaller or solder my own, what did you guys use? The other end I'll probably use an 90 degrees version of this: https://www.ebay.co.uk/itm/302191897699 and an eyelet like this: https://www.ebay.co.uk/itm/201464361954 pedal end, am I miles off the mark and am I over thinking it?
|
Dave
Not done mine yet but was just going to get a universal cable kit from Venhills used them loads when I was into me motorbikes Gary |
Hi I used a universal one of eBay came with different nipples so was spot on for me
|
Thanks for that, think I'll just get one of these: https://www.ebay.co.uk/itm/171198151941.
|
I used the original it fits just about once I moved the support bracket down an inch or so:p
|
Quote:
|
All times are GMT +1. The time now is 04:00 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.