Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   SVA/Legal (http://www.haynes.co.uk/forums/forumdisplay.php?f=9)
-   -   Iva 99dba???? (http://www.haynes.co.uk/forums/showthread.php?t=3570)

Tilly819 1st February 2010 10:16 AM

Iva 99dba????
 
hi all is 99.9 still 99 in the eyes of the IVA man?

I have managed to get my car down to 99.0 with the inroduction of a diferant back box and some sound deadning around the engine bay

but i dont fancy cutting it that close, iv ordered a bonnet scoop this morning to hopfully cut down the induction noise well at least muffle it abit.

also you now the exhaust wrap. if i use it then take it off 1 can u re use ( i think my dad fancys some)
and does it leave any marks on the manifold???

chears
tilly

(almost there)

spud69 1st February 2010 10:19 AM

Well done Tilly, you're nearly there.

Don't forget though that it's 3/4 rpm at max power rather than max rpm, may save you 1000rpm or so.

AndyH

AshG 1st February 2010 06:47 PM

i have only got to have mine done at 3750rpm as my max power comes in at 5000rpm. :D fingers crossed that its ok on the day

dont forget that at iva they do the test in an open area so its less likely that the sound will have objects like fences to reverberate off.

slimtater 1st February 2010 07:04 PM

You can have my db killer as it didn't fit mine and I didn't need it on Sunday. Always worth having with you to pop in if it looks like being an issue.

Tilly819 3rd February 2010 10:22 PM

is it one you stuff up the can outlet slim?? if so i dont think it would fit because of the bend iv put on the end but i think i might have quietended it down almost enough now will have to test it again at the weekend

chears
tilly

slimtater 3rd February 2010 10:32 PM

Yes it is a "stuff it up" one. No problem and good luck.

Tilly819 3rd February 2010 10:46 PM

chears slim, hope to have a bit of a pre iva check at the local garage emissions brakes etc this weekend then take it for a good shake down and get it weighed at the local airfield

tilly

ps hope it dosnt brake


All times are GMT +1. The time now is 08:54 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.