Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Bodywork and interior (http://www.haynes.co.uk/forums/forumdisplay.php?f=8)
-   -   Equinox Bodywork measurements in 3D (http://www.haynes.co.uk/forums/showthread.php?t=13563)

voucht 6th January 2015 03:45 PM

Equinox Bodywork measurements in 3D
 
Hi,

Last year I made for Equinox Products ltd (http://www.equinoxproducts.co.uk/) 3D drawings of all the parts of their bodywork, with all measurements.

I got the agreement from Dave at Equinox to publish them here. They are now on my "Google drive", and accessible at this link:

https://drive.google.com/drive/folde...Uk?usp=sharing

Perhaps someone could put them in the "sticky section", or in Alga's FAQ, as a lot of builders want to know bodywork's measurements to mock up, at a stage of their build where they haven't the bodywork yet. So it could be helpful to the community.

Hope this will help :)

Thank you.

thailoz 6th January 2015 10:48 PM

Thanks that is gonna be really helpful

Rosco 6th January 2015 10:55 PM

Perfect, very helpfull

twinturbo 7th January 2015 07:21 PM

Thats Stuck :)

alga 8th January 2015 04:23 PM

Added to the FAQ.

beardydave 9th January 2015 08:59 AM

Thanks, are you allowed to post the 3d models too?

I'm drawing my car in 3d, and this will help with seeing whats going to fit under my bonnet.

wylliezx9r 9th January 2015 12:20 PM

Quote:

Originally Posted by beardydave (Post 99610)
Thanks, are you allowed to post the 3d models too?

I'm drawing my car in 3d, and this will help with seeing whats going to fit under my bonnet.

I know the chassis is already available in 3D from http://grabcad.com/library/haynes-roadster-chassis to save you time. It's accurate as well I used it to produce my side panels.

beardydave 9th January 2015 01:24 PM

My chassis is already drawn and made, but thanks.

Ben_Copeland 10th January 2015 08:06 AM

I'm not sure if he did any 3d models. I'll check with Dave later and see if there anything else

wylliezx9r 10th January 2015 10:19 AM

Quote:

Originally Posted by Ben_Copeland (Post 99621)
I'm not sure if he did any 3d models. I'll check with Dave later and see if there anything else

I would have thought it would have had to be modelled in 3d to generate the 2d views ?


All times are GMT +1. The time now is 06:09 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.