Slow progress, but I shortened the pickup pipe and have an oil return and drain plug. Whoohoo.
Cheers Stot |
You can't rush perfection :)
Russ |
I was actually thinking, If you were not extending the sump backwards, you could drill and tap the 6 bolt posts from the bottom and bolt on a 5-6mm piece of aluminium or some steel with sealant gasket rather than needing to get it all TIGed up.
I wasnt going to extend back but decided I would... Cheers Stot |
Im swapping to 13" wheels and tyres as I want to get a softer compound tyre and have the extra sidewall flex so bought 1 just to make sure it cleared everywhere ok.
They clear the 1.6 running gear nicely so ordered the other 3. Ill cover them in A021Rs in 185/70/13 from http://www.polleymotorsport.co.uk/ only £50 each + VAT. Cheers Stot |
Got my downpipe sorted today. Made a frame from exhaust brackets and 20mm tube then cut and welded bends n flanges.
I have an O2 bung to go on the lower section and its done. Cheers Stot |
That fit quite well.
Cheers Stot |
Well done, looks good. Nice winter project that. Will you wait for spring before you drive it in anger? :)
|
Slight mod to bodywork hole and nobody will know ;)
Nice work. TT |
Quote:
Cheers Stot |
Sump is now ready to be fitted after being welded by a mate who said it was a pig to weld!
Cheers Stot |
All times are GMT +1. The time now is 02:43 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.