Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Engine/transmission (http://www.haynes.co.uk/forums/forumdisplay.php?f=6)
-   -   Fuel pump (http://www.haynes.co.uk/forums/showthread.php?t=1800)

Rik178m 15th April 2009 09:04 AM

Fuel pump
Whats every one using? Do I need to save the pump from my donor?

Bonzo 15th April 2009 09:21 AM

Assuming you are going the fuel injection route you have two options.

Save the donors pump & sender unit.
You will then need to fabricate your tank to suit the pump & sender assembly. You will also need to give some thought into building a swirl chamber within your tank.

Use an aftermarket, externaly mounted high pressure pump, filters & external swirl pot.
This being the case you will only need 1 flow & 1 return union on your tank. + any mod needed to fit a sender unit if you want to fit one. :)

All times are GMT +1. The time now is 01:13 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.