Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Engine/transmission (http://www.haynes.co.uk/forums/forumdisplay.php?f=6)
-   -   Bonzo - If you're still interested, my manifold pics! (http://www.haynes.co.uk/forums/showthread.php?t=1843)

adrianreeve 23rd April 2009 09:40 AM

Bonzo - If you're still interested, my manifold pics!
 
3 Attachment(s)
Bonzo

I said ages ago I'd put some piccies up of my manifold - finally managed to do it! Hope your conversion is going ok, this one turned out fairly easy in the end!

Attachment 278

Attachment 279

Attachment 280

Cheers

Adrian

RAYLEE29 23rd April 2009 01:55 PM

hi, that looks good? what engine are you usig? and what are the throttle bodies from?
Ray

adrianreeve 23rd April 2009 04:48 PM

It's a 2.0l silvertop zetec engine. The bodies are from a CB900 hornet. They're 36mm bodies, which although a little small, will give a much better throttle response and low down torque (I hope!)

As they're cast in pairs, it's easy to respace them.

Cheers

Adrian

Bonzo 23rd April 2009 06:52 PM

Looking good adrian
 
Hi Adran.

Many thanks for that. The manifold has come out very well. :)

I have done nothing on mine recently, been a bit crook the last few weeks. :(

Finaly feeling a bit better last weekend, a mountanin of gardening to catch up on. :eek:

Hopefully it'll not be too long before I can get back out into the workshop. :confused:


All times are GMT +1. The time now is 07:54 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.