Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Running gear (http://www.haynes.co.uk/forums/forumdisplay.php?f=5)
-   -   15mm Inside Dia tubing ( anyone got any?) (http://www.haynes.co.uk/forums/showthread.php?t=3691)

ozzy1 19th February 2010 01:27 AM

its 14.1mm

twinturbo 19th February 2010 04:52 PM

Measured both..

Small one seems to be about 13.7mm but may expand
Big one seems to eb about 17mm but may close up.

Hopefully I can confirm tomorrow what fits what.


twinturbo 19th February 2010 09:23 PM

SeriesLandy 19th February 2010 10:05 PM

The longer one (right) is what I have and it fits the escort rack. Which one is that pas/ non pas?

twinturbo 19th February 2010 10:33 PM

the long one is NON Pas..

The short one is 2WD PAS..

I am fairly sure 4x4 PAS has 2 UJ's and no rubber dog chew.

SO Back to Tallon...

It will be about 1m of the tube..


SeriesLandy 20th February 2010 01:55 PM

I would also be interested as well as I havn't made this piece yet.

james3004 20th February 2010 05:26 PM

i feeling that some one could make some money on this one, i need a bit too:D

twinturbo 20th February 2010 05:45 PM

I will measure the approximate length again later. And confirm the fittment of the joint on the rack.


twinturbo 20th February 2010 05:50 PM

1 Meter should be more than sufficient.


twinturbo 20th February 2010 10:00 PM

And the thin shaft fits the escort rack.

So I think I need 15MM ID tube.

I would sugest if you want to be sure that you measure your own shafts though :p

MR Tallon......


All times are GMT +1. The time now is 09:10 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.