New ball joint for front wishbones.
 

Some of you may remember when the forum first started there was a thread about an alternative to the old Maxi ball joint.

Well, during my time off and by way of giving me something to take my mind off things going on i started looking at alternatives. And I think I've found one :) It has the same taper as the Maxi one but is smaller at the start of the taper, I've machined a pair of uprights to check and they fit with minimum machining and are of the correct design for this application.

The bonus also with the new ball joint is that they will only be £15 a pair. I'm in the process of getting the parts for the new wishbones together, so as soon as they are ready I'll post up some pictures.

Kind regards

John